User's Manual

25
4. Press the SCROLL UP or DOWN button. (OFF is the preset PBX number.)
PBX MODE OFF - set for direct line access.
5. Press and hold down the
RE/PA
SAVE
button.
6. Press the
FUNC
V.M.
button to go back to STANDBY mode.
NOTE: When placing a call by using the DIAL 7
7
or the DIAL 10
0
10
OPER
or the DIAL
1+
#
1+
button, this telephone will automatically add the PBX number and a
pause time before the dialed telephone numbers.
G. Flash Time
This unit enables you to select the standard FLASH TIME applicable to your calling area. If
you are not sure of the FLASH TIME you are using, call your local telephone company.
1. Press the
FUNC
V.M.
button.
2. Press the TELEPHONE KEYPAD
7
PRS
button.
3. Press the
EDIT
button.
4. Press the SCROLL UP or DOWN button to select the FLASH TIME. You can also
set the FLASH TIME by entering the FLASH TIME number using the TELEPHONE KEYPAD
~
0
10
OPER
9
WXY
buttons. The preset FLASH TIME is 600 milliseconds.
5. Press and hold down the
RE/PA
SAVE
button.
6. Press the
FUNC
V.M.
button to go back to STANDBY mode.
H. Pause Time
This unit enables you to adjust the PAUSE TIME when placing a call using a switchboard
system or dialing long distance calls.
1. Press the
FUNC
V.M.
button.
2. Press the TELEPHONE KEYPAD
8
TUV
button.
3. Press the
EDIT
button.
4. Press the SCROLL UP or DOWN button to adjust the pausing time. The preset
pause time is 4 seconds.
5. Press and hold down the
RE/PA
SAVE
button.
6. Press the
FUNC
V.M.
button to return to STANDBY mode.
Caller ID System Operation