Manual Part 2

Multiple Handsets Feature
After two or more HANDSETS are registered with a BASE unit, and different extension number
is assigned to each HANDSET, you get the advanced multiple handset features. The following
paragraphs tell you how to use these advanced features.
How to Receive Calls
When there is an incoming call, all HANDSETS will ring, and the name and telephone
number of the caller will appear on the LCD Screen provided that you have subscribed to
the Caller ID service. Any HANDSET can press the button to answer the call.
How to Place Calls
Press the button on any HANDSET to get a dial tone, and then follow the Placing
Calls in page 12 for the number dialing.
NOTE: If the line is used by other HANDSET, “LINE IN USE” will be displayed.
Privacy Feature
While a HANDSET is talking over the line, the other HANDSETS can not connected to their
conversation by pressing the button on his own HANDSET. Meanwhile the other
HANDSETS can not make a call at this moment, but the other HANDSETS can make
intercom call to each other.
Handset to Handset Intercom Call
You can make an intercom call to any HANDSET which is
registered to the same BASE unit.
1. Press the button. The “EXT NO.” and “- -”
appear on LCD Screen for you to enter the desired 2-
digit extension number.
2. The called HANDSET rings. If the called HANDSET is
in use, you will hear the busy tone, and “HS - - IN USE”
will be displayed.
3. The user of the called HANDSET can press his
button to answer the intercom call.
4. Before the called HANDSET answers you call, you can
press the button again to cancel your
intercom operation.
5. When you finish with the intercom call, press the
button.
talk
intercom
talk
intercom
talk
talk
talk
Multiple Handsets Feature
HS12 IN USE
the called handset (ext no.=12)
is in use
32