Owner's Manual Part 1

K. Handset Registration

The multiple-handset feature allows up to 90 handsets to link to the BASE UNIT. Each new

HANDSET has to register into the BASE UNIT to get a 2-digit extension number from 10 to

99.

1. Press the button.

2. Press the TELEPHONE KEYPAD button.

3. The “EXT REG” will appear on the LCD Screen.

4. Press the button.

5. Use the TELEPHONE KEYPAD ~ buttons to enter the name of the

extension phone user.

6. Press the SCROLL DOWN button.

7. Enter the 2-digit extension number by using the TELEPHONE KEYPAD ~

buttons.

8. Press and hold down the button.

9. While the “REGISTERING” displaying on the LCD Screen, press and hold down the

button on the BASE unit. Release the button until the “EXT REG. ”

appears on the LCD Screen.

10. Press the button to go back to STANDBY mode.

IMPORTANT: If the unit you purchased is a one-handset package, we suggest that you

assign your new HANDSET with the extension number (10).

If the unit you purchased is with two or more handsets, after charging the

HANDSETS, you should do the registration to assign different extension

number to each HANDSET.

NOTE: The ADDITIONAL HANDSET (HCB704) is available through:

U.S. Electronics Service Center

105 Madison Avenue

New York, NY 10016

1-800-825-5208

Do the handset registration to assign a new extension number once you get the new

ADDITIONAL HANDSETS.

voice mail

pagepage

redial

save/pause

wxyz 9

edit

flash

voice mail

Caller ID System Operation