Safety Instructions Part 4

7
7. Install the BATTERYPACK by plugging it into the
BATTERY CONNECTOR inside the BATTERY
COMPARTMENT. The HANDSET LCD Screen
will display “WAIT REG.” Follow the Handset
Registration in page 29 to register your
HANDSET.
8. Place the BATTERY PACK inside the BATTERY
COMPARTMENT.
9. Slide the H A N D S E T B AT T E R Y
COMPARTMENT COVER firmly into place in its
closed position.
10. IMPORTANT: Before initial use, charge the
HANDSET for 12 hours.
11. TONE/PULSE Select Switch:
A. If your home is equipped with a tone dialing
system, set the TONE/PULSE Select Switch
to the TONE position.
B. If you have a rotary dialing system, set the
TONE/PULSE Select Switch to the PULSE
position.
C. If you are unsure which system you have, set
the TONE/PULSE Select Switch to the TONE
position. Press the button on the
H A N D S E T and make a call. If the call
connects, leave the switch as is; otherwise
set to the PULSE position.
talk
Getting Started