Safety Instructions Part 4

12. Set the date and time on the HANDSET. (See page 25 for details.)

13. Press and hold the button to initiate your Answering System. (See details on page

34.)

14. Set the date and time on the BASE UNIT. (See page 34 for details.)

You are now ready to use your new

BellSouth Cordless Telephone.

stop

Press the button to confirm that you

have a dial tone. If you do not get a dial

tone, review steps 3 through 11. If you still

do not have a dial tone, refer to the

Problem Solving section on page 46.

With the back of the HANDSET facing up,

insert one side of the BELT CLIP HOOK

into the matching slot at the top side of the

HANDSET. Press down on the opposite

side of the BELT CLIP until the other

HOOK locks into the slot on the side of the

HANDSET.

talk

IMPORTANT

In order to utilize the Caller ID feature, you must

subscribe to Caller ID service from your local

telephone company.

Getting Started

ANTENNA

HANDSET

BELT CLIP HOOK