User's Manual

Notice
CIG have the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any
time and to discontinue any product or service without notice, CIG has the final interpretation.
4
3.2 Ports
Table4 Functions of ports of the WF-122
Port
Description
LAN/PoE
10/100/1000M Base-T Ethernet ports (RJ-45), used as a WAN
port and used for being powered by PoE function.
CONSOLE
Console port (RJ-11), used to manage the WF-122 software.
Reset
Reset button. Pressing the button for a long time (longer than 5s)
to restore the device to factory defaults and resets the device.
12V 1.5A
Power port, used for connecting the power adapter.
3.3 Indicators
Figure4 Indicators
Table5 Indicators of the WF-122
Indicator
Color
Status
Description
RUN
-
Off
No power to AP
Red
Steady on
The hardware of the device is failure.
Green
Blinking
The device is managed by controller.
LAN
-
Off
The Ethernet link is unavailable.
Yellow
Steady on
Reserved for link speed (NIB in PCB)
Green
Steady on
The Ethernet link is negotiated, and the rate is
1000Mbps.