User's Manual

3.4. Go through locking holes by cable-tie to safely content AP with bracket
5. LED Definition
LED
Function
State-Color
Indication
RUN
AP power / ready status
Steady - Green
APis ready
Flashing - Green
AP is managed by controller
Red
AP hardware failure
Off
No power to AP
LAN
Network Link Status
Steady - Green
1000Mbps Ethernet link negotiated
Steady- Yellow
Reserved for link speed (NIB in PCB)
Flashing
Ethernet link activity
Off
Ethernet link unavailable
5G
5G Hz Radio Status
Steady– Green
5G Hz radio enabled in HT WLAN
mode
Off
5G Hz radio disabled
2.4G
2.4G Hz Radio Status
Steady – Green
2.4G Hz radio enabled in HT WLAN
mode
Off
2.4G Hz radio disabled
6. Software Installation
Logging in to the Web Page
1. To configure PC IP address, fill 192.168.188.x in “IP address” and 255.255.255.0
in “Subnet mask”(set Window7 as an example to show the properties)