INSTRUCTION MANUAL AV-Receiver C-102

Operation and functions

Press the STANDBY key of the remote control to switch to standby mode.

The display is switched off and all functions are reduced to a minimum.

Thus the power consumption of the receiver is reduced to a minimum. In

standby mode the receiver only responds to the STANDBY key of the

remote control.

Consider the environment and switch off the unit after use.

Selection of input source

Switch on the AV receiver and the television set, if desired.

Select the corresponding audio/video input on the television set.

Now you can call the currently active input source. Select tuner to listen to the

radio, AUX 1 or AUX 2 if an analogue device has been connected, or Optical or

Coaxial in connection with a digital signal from a DVD player or a digital satellite

receiver.

Select TV if you wish to hear a television broadcast through the receiver.

Some television sets require a special setting on the television set to ensure correct use of the SCART

channel.

If in doubt, please read the manual provided with your television set.

Standby

.........

STANDBY

DIGITAL DVD/SAT

AUX 1

AUX 2

TUNER

MODE

DSP

TUNING BANDINPUT

C-102 HOME THEATRE RECEIVER

STANDBY