User Manual

Page - 116 of 297Cinedeck USER GUIDE - Cinedeck Version 4.5 13126 – June 15, 2015 - 19:21
-Overview tab User Interface
Overview tab / - cont...
Name Location Description
190- inpUT seTTings
5.17 Overview tab
- (p.114)
Displays all of the input settings for the selected channel. Clicking the various data
areas provides direct access to the relevant settings page, ie, touching “resolution”
switches to the input page where input settings can be adjusted and touching “auto-
rec” switches to TC & automation.
191- masTer
enCoder seTTings
5.17 Overview tab
- (p.114)
The master encoder region displays all of the settings related to the master encode.
Clicking in this area switches to the master encode setup page.
192- masTer file
desTinaTions
5.17 Overview tab
- (p.114)
The master file destinations section displays the selected destination drive, folder and
file naming variables and text related to the master primary and redundant encodes.
Clicking in this area switches to the master encode page.
193- proXy enCoder
seTTings
5.17 Overview tab
- (p.114)
The proxy encoder region displays all of the settings related to the proxy encode.
Clicking in this area switches to the proxy encode setup page.
194- proXy file
desTinaTions
5.17 Overview tab
- (p.114)
The proxy file destinations section displays the selected destination drive, folder and
file naming variables and text related to the proxy primary and redundant encodes.
Clicking in this area switches to the proxy encode page.
195- name
5.17 Overview tab
- (p.114)
Name reflects the channel name variable or wild-card shown also at the top of the
setup screen in the page tab bar. The input name variable can also be used in folder
and file names. By default these are sequentially named, input 1, input 2, etc. Click
here to open an on-screen keyboard to change the name.
196- label
5.17 Overview tab
- (p.114)
Label is an additional channel specific metadata field which can be used in folder and
file naming. By default these are sequentially named, input 1, input 2, etc. Click here
to open an on-screen keyboard to change the name.
197- preview
5.17 Overview tab
- (p.114)
Preview is a thumbnail of that channels active video. The thumbnails can also be
clicked to toggle between channels displayed. The orange bordered channels is the
selected channel.
198- preview lUT
5.17 Overview tab
- (p.114)
Preview LUT indicates if a LUT is active on the Cinedeck user interface video preview
for the selected channel and if so, displays the LUT name.
199- bUrn lUT
5.17 Overview tab
- (p.114)
Burn LUT indicates if a LUT is being used to color process the recorded proxy for the
selected channel and if so, displays the LUT name.
200- Copy To oTHer
CHannels
5.17 Overview tab
- (p.114)
Copy to other channels allows copying channel independent settings such as audio
channel selection and routing and file destination drive from the selected channel to
one or more other channels.