User Manual

Page - 128 of 297Cinedeck USER GUIDE - Cinedeck Version 4.5 13126 – June 15, 2015 - 19:21
Path editorProject manager User Interface
Project manager / Path editor cont...
Name Location Description
233- CUrrenT
projeCT
5.18.3 Path editor
- (p.127)
Displays the project name you are currently editing.
234- TemplaTe
5.18.3 Path editor
- (p.127)
This is an editable field which displays the text template used to form the name you
are creating. Any letter proceeded by the “%” symbol is a wildcard or variable which
will be filled in when recording is activated.
235- eXpansion
5.18.3 Path editor
- (p.127)
The expansion display shows the full name as described by the template above.
Where possible, wildcard information is filled in but some data such as start time
code is not available until recording starts so will be displayed as the same variable
entered in the above template.
236- wildCard
sHorTCUTs
5.18.3 Path editor
- (p.127)
The wildcard shortcut buttons provide easy access to the various record-time
wildcards. Press a button and the appropriate variable is inserted into your template
at the current cursor position.
237- on sCreen
Keyboard
5.18.3 Path editor
- (p.127)
The on-screen keyboard can be used with a mouse or by presses when a touch
screen is available. It works in a similar fashion to a standard USB keyboard with the
following exceptions:
• The “del” key functions as backspace, deleting characters to the left of the cursor
• The “clear” key deletes all text in the current field
• The “shift” key functions as a shift lock toggle; On is all caps, Off is all lower case
• Depending on the preference set on the “prefs” setup page, space bar will place a
underscore character in place of a space
238- CanCel bUTTon
5.18.3 Path editor
- (p.127)
Cancel any changes and return to the previous screen.
239- save & Close
bUTTon
5.18.3 Path editor
- (p.127)
Pressing save and close, confirms any changes, closes the project setup screens and
returns to the main setup area.