Cinedeck Extreme User Manual Version 2.
Cinedeck Extreme User Manual V 2.06 About this manual Important! This manual reflects the state of the Cinedeck Extreme hardware (1.0) and software (2.0) at the time it was published. It will be updated frequently as new features are implemented, and will not necessarily reflect legacy information. Legacy versions of the hardware and software would be covered by the manual included with that release.
Contents About this manual............................................................................................................................. 2 Copyright and Trademark Notice.................................................................................................... 2 What’s included.................................................................................................................. 7 Safety information..........................................................................
Highlight clipping [setup]:[preferences]:[clip]............................................................................... 26 Full Screen display [fullscreen]..................................................................................................................... 27 Full screen mode in main user interface [fullscreen].......................................................................... 27 Full screen mode in main user interface [fullscreen]...............................................
Input pixel format..................................................................................................................................... 44 Input video source................................................................................................................................... 44 Input audio source................................................................................................................................... 45 Input preview options..............................
[rec/stop]..................................................................................................................................................... 59 [3Gb/s out].................................................................................................................................................. 59 [Disable safe].............................................................................................................................................. 59 [drop stop].................
Average data rates........................................................................................................................... 76 Prores............................................................................................................................................................ 76 Avid DNxHD............................................................................................................................................... 77 CineForm....................................
What’s included In addition to the Cinedeck Extreme recorder, everything you need to get started is included in the custom Pelican case, including media if you purchased any with your Cinedeck. Please check to ensure that all expected contents are in the case. In the event that anything is missing, please contact support@cinedeck.
Safety information CAUTION: The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC: This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications Commission (FCC) rules.
Support information Support Hours: Support office hours are 9am-6pm EST, but we generally answer email from 8am to midnight EST, 7 days a week, and at odd hours of the night. The direct support email address is: support@cinedeck.com and we do answer email within minutes. Phone support can be reached at +1-646-642-6985. If you do not reach us, please do leave a message, as we endeavor to return calls within a few minutes within the expanded hours noted above.
Hardware I/O 12–28V wide input DC jack AUX 5/12V 500MA DC output for accessories RS-422 COM port* Power switch HDMI record in and monitor out 2 channel analogue audio input Remote record connector Per-channel line/mic and phantom power switches for on-board audio input VGA for UI/preview clone on external VGA monitor Timecode sync port (optional feature) Wifi antenna port Headphone jack for audio monitoring Dual link/3G HDSDI in and out USB ports for field restore and peripheral support ESATA with po
Basic operation Loading the SSD media NOTE: An SSD is not included in the Cinedeck EXTREME kit. It must be purchased separately. Please contact your dealer or email us at orders@cinedeck.com for more information. On the i/o panel on the right side of the Cinedeck EXTREME, you will see the slot for the SSD media. Slide the SSD into the slot with the SSD connectors facing towards you. Once the Cinedeck EXTREME recognizes the SSD, media information will appear in the upper right hand corner of the screen.
Powering up the Cinedeck Note: we recommend that when you power up your Cinedeck EXTREME via the AC adapter, power brick, or battery for the first time, you confirm that the voltage falls within the input range of 12 to 30V. To safely disconnect the LEMO connector from the device, you must slide the sleeve of the connector and then gently tug to remove the connector from the Cinedeck EXTREME.
User Interface General notes about the user interface The user interface has been designed with use in high pressure situations in mind, where a minimum of interaction is desirable to operate the Cinedeck and in normal operation, every tool commonly needed is readily at hand. Most commonly used tools are accessible within one touch from the main screen.
Main user interface, cont. Record start [record] record To prevent accidental recordings, the button must be held down for about 1/2 second before record will engage. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.
Main user interface, cont.
Main user interface, cont. Safe Frame Display [safe] safe long lat alt temp Enables selection of various standard safe frame overlays for common broadcast safe areas, cinema and broadcast aspect ratios, and image composition assistance. -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial Media 128GB Free 73GB Remain 46 min Battery 44% last take 3:22 next: reel_2_031 record slate SDI 1.85:1 2.35:1 16:9 4:3 2.
Main user interface, cont. Letterbox Safe Frame Display [safe]+ [setup][input][letterbox] safe First you must choose a safe area setting as shown on the previous page. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial Media 128GB Free 73GB Remain 46 min Battery 44% last take 3:22 next: reel_2_031 record slate SDI 1.85:1 2.35:1 16:9 4:3 2.
Main user interface, cont. Grid Display [grid] grid Enables selection of various standard grid overlays for image composition assistance. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.
Main user interface, cont. 100% Display [100%] 100% Enables 100% (1:1 pixel) or actual size view of incoming signal. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel3_015.mov Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min record slate SDI safe To enable 1:1 or 100% display, touch the [100%] button. grid 100% You can toggle the 1:1/100% display on and off by a short touch of the [100%] button.
Main user interface, cont. edge Edge detection display [edge] Enables edge detection to aid in accurate focus. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 edge_test next: test_005.mov Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min record slate SDI safe To enable edge detection tool display, touch the [edge] button.
Main user interface, cont. Image Analysis [analysis] analysis Enables image analysis tools menu: Waveform and Histogram (per channel or parade), and Vectorscope. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel3_021.
Main user interface, cont. Waveform [waveform] waveform The waveform is a real-time display of image luminance values to aid in correct exposure settings. long lat alt temp Settings can be for individual channels, Red, Green, Blue, Composite (RGBY) and R, G, B simultaneous separate display, or “parade,” of the individual channels. Once selected, you can toggle the analysis tools selection menu on and off by a short touch of the [analysis] button.
Main user interface, cont. 0-255 scale [255] 255 Heavy lines at 16 and 235 indicate the broadcast safe values long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel3_021.
Main user interface, cont. Historgram [histogram] histogram The Histogram is a real-time display of image luminance values to aid in correct exposure settings. Settings can be for individual channels, Red, Green, Blue, Composite (RGB) and R, G, B simultaneous separate display, or “parade,” of the individual channels. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel3_021.
Main user interface, cont. Vectorscope [scope] scope The vectorscope is a real-time display of signal chrominance information to aid in setting correct color balance. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel3_021.
Highlight Clipping [clipping] clipping Enables highlight clipping tool display. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial Battery 44% last take 3:22 next: reel_2_031 Media 128GB Free 73GB Remain 46 min record slate SDI Highlight clipping shows brightness values above a certain threshhold of brightness as an aid to correct exposure.
Main user interface, cont. Full Screen display [fullscreen] fullscreen Enables full screen preview display and hides user interface overlays on the preview both in record and playback displays. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.
Main user interface, cont. Full screen mode in playback interface. [fullscreen] fullscreen When in full screen mode in playback, a brief touch of the screen will bring up the transport controls momentarily. slate safe grid 100% edge analysis clipping fullscreen back 00:01:55:07 in/out step open Full screen mode in playback interface. [fullscreen] fullscreen Full screen mode with safe frame and grid overlays. Setup Menu Tabs [setup] setup Invokes the setup menu tabs.
Main user interface, cont. Setup Menu Tabs [setup] setup See: Preferences and Settings for full description of options in the prefs tab. input files loss stop drop stop TC conv input prefs fan ctrl battery meter restart app main low Anton Bauer exit app grid Digi View GPS mouse mouse exit fan ctrl 3Gb/s out Peak vu high 3Gb/s out P not Psf clip reset prefs save prefs Disable Safe load prefs support@cinedeck.com Version 2.0 release build 2.
Main user interface, cont. Playback file manager [play]:[open] play If there is no clip in the current project folder, the clip manager is opened by default. If there are other projects or scenes with clips, they can be opened from here.
Main user interface, cont. lock To unlock, touch the lock button and slide the popup slider to the right. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel_2_031 Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min record slate SDI safe It is necessary to stay within the borders of the slider or the unlock will not register.
Main user interface, cont. long lat alt temp -74.006 40.714 51 72 Settings and Status displays Fan mode [fan] displays current fan mode [auto][fixed] long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.
Main user interface, cont. manhattan_aerial Filename display. next: reel_3_001.mov While recording is paused, displays project name and scene name with the next record take increment. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel_2_031 Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min record slate SDI safe ie. PROJECT and scene_increment.
Main user interface, cont. Battery: 44% Last take duration display [last] Last take: 00:07:23:27 Displays the duration of the last take in minutes and seconds. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.
Main user interface, cont. Audio options menu [ > ] SDI Touch the arrow to invoke the audio controls pop-up. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 Media 128GB Free 73GB Remain 46 min Battery 44% last take 3:22 next: reel_2_031 record slate SDI reset all monitor + Controls record audio levels both globally and for individual channels as well as headphone monitoring volume.
Main user interface, cont. 2/2 0 Performance metrics display Indicates the status of encoding and disk write buffers. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial next: reel_2_031 Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min record slate SDI safe The upper number is the encoding buffer. The left number is the current usage, and the right number is the maximum usage in the current session.
Playback user interface play Playback interface [play] The second main user interface is the playback screen, which is very similar to the main record interface, with the addition of playback specific tools, mainly the transport controls, and includes displays with relevant information for the currently queued clip, includuing output settings, project, scene and take names, timecode display, and access to all commonly used tools. long lat alt temp -74.0715 Frame 1080p YUV10 Fps 23.98 40.
Playback user interface, cont. Playback file manager open [open] open The open button invokes the playback file manager. long lat alt temp -74.0715 Frame 1080p YUV10 Fps 23.98 40.416 Codec CineForm high 51.
Playback user interface, cont. Take delete [take delete] take delete The take delete button [take delete] enables the deletion of takes. When the button is active, a red “x” appears on each take. To delete a take, press the x and then slide the slider to either the left or right depending on where in the window the take is. BEWARE! THIS CANNOT BE UNDONE! Think at least twice before deleting takes. Copy to other storage first.
Playback user interface, cont. File recovery, continued [recover] recover While the recovery is in process, the progress bar will fill the screen. File recovery [recover] recover Once the recovery is finished, the thumbnail will be displayed and the file can be opened normally in playback, or copied to other media for editing.
Setup Menu Tabs [setup] setup Invokes the setup menu tabs. [input][files][tc][convert][update][prefs] long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial Battery 44% last take 3:22 next: reel_2_031 Media 128GB Free 73GB Remain 46 min record slate SDI safe grid 100% edge analysis clipping Phones play fullscreen lock reset 00:12:06:21 setup stop The prefs tab includes general preferences settings.
Input preferences tab [setup]:[input] Input preferences tab [setup]:[input] setup The user preferences tabs are where preferences and settings for input, output, time code and general settings are selected. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.
Input preferences tab, cont. [setup]:[input] Application restart on settings change input Some settings changes require a restart of the application. In the input settings page, application restart is required for: 1) switching between compressed and uncompressed modes. input files input convert input prefs source fps format video audio options codec quality wrapper 1080i 50 4:2:2 YUV8 SDI Off preview CineForm proxy MXF 1080i 59.
Input preferences tab, cont. [setup]:[input] Input frame rate input fps Not all frame rates are available in all codecs. If a codec or quality setting is not available based on the input frame rate, there will be no setting available in the codec or qualitycolumns. Valid input frame rates are: 23.98p 50i 25p 5994i 29.97p 60i 50p 5994p 60p Variable rates are not supported at this time.
Input preferences tab [setup]:[input] Input audio source input audio Audio source selections are: Off SDI embedded audio, 2 channels SDI embedded audio, 4 channels AES digital audio, 2 channels AES digital audio, 4 channels Balanced line level (XLR input 1 & 2 on breakout cable) input files input convert input prefs source fps format video audio options codec quality wrapper 1080i 50 4:2:2 YUV8 SDI Off preview CineForm proxy MXF 1080i 59.
Folder manager tab [setup]:[files] Folder manager tab [setup]:[files] files input The file manager allows creation of a folder and subfolder file structure for the organization of projects. TC files project convert input prefs scene test reel_1 mugla_aydin reel_2 Take names are derived from the folder names, plus an auto-increment. The next take is always shown in the take increment display.
Folder manager tab, cont. [setup]:[files] Renaming folders files Folder renaming is invoked by touching the folder name. test_scene [Safe disable] must be on in the main preferences menu [setup][prefs] for folder renaming to be enabled, and the folders cannot have takes (files) in them. 1 q w a shift The keyboard allows only the valid characters allowed in Windows file names. 2 z space 3 e s x 4 r d c 5 t f 6 y g v b 7 u h n 8 i j 9 o k m .
Folder manager tab, cont. [setup]:[files] Pre-configuring media with folders files A suitable folder structure can also be created on the Cinedeck or a Windows workstation in the Windows Explorer, or on a mac workstation if running an NTFS compatibility program such as the shareware application Tuxera NTFS for Mac.
Time code Preferences Tab [setup][TC] Time code Preferences Tab [setup][TC] TC input files TC source mode auto rec gen rec run off SDI per take offset + There are three main sources of time code available: Ambient free run offset - Internally generated Embedded SDI (LTC, RP188, Serial) ExSync hardware timecode module [ExSync]* save tc drop show UTC The time code tab allows the user to choose the source for time code for the project and other time code options.
Time code Preferences Tab, continued [setup][TC] Generated drop frame time code [drop] TC drop Toggles internally generated time code. When on, internally generated time code will be displayed as SMPTE drop frame time code, and drop frame time code will be saved into the file.
Time code Preferences Tab, continued [setup][TC] Embedded SDI time code auto-record, VITC [future] TC VITC Auto record from VITC. Future feature. input files TC source mode auto rec convert input prefs offsets gen plain off off SDI generic offset + Ambient VITC offset - show UTC show local back ExSync hardware timecode module [ExSync] TC ExSync* The hardware timecode module can be jammed to an external LTC source.
Time code Preferences Tab, continued [setup][TC] Hardware timecode module not found TC ExSync* If the “hardware timecode module not found” error message appears, you do not have an ExSync hardware timecode module installed or there is a problem with the module. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.
Time code Preferences Tab, continued [setup][TC] Time code display modes TC show UTC Internally generated, free run time code can be displayed in four ways: SMPTE Non-drop: 00:00:00:00 SMPTE Drop frame: 00:00:00;00 UTC Time: hh.mm.ss Local Time: hh.mm.ss input files TC source mode auto rec convert input prefs gen record run none SDI per take offset + Ambient free run offset - save tc drop show UTC offsets SMPTE non-drop is default for internally generated.
Convert preferences tab [setup][convert] Convert tab [convert] convert The Cinedeck hardware supports a large number of up, down and cross conversion modes.
Convert preferences tab, continued [setup][convert] Input Up Down and Cross conversion modes [convert]:[input] or [output] convert Input settings must be set to the conversion destination mode. long lat alt temp -74.0715 Frame NTSC 40.416 Fps 29.97 51.166 Codec CineForm 72 manhattan_aerial next: reel_2_031 Battery 44% last take 3:22 Media 128GB Free 73GB Remain 46 min record slate SDI safe For example.
Convert preferences tab, continued [setup][convert] convert Video input and output up, down, and cross conversion modes [convert]:[output] [simul out][24p->59i out] Convert preferences tab, continued [setup][convert] Simultaneous-output up, down, and cross conversion modes [convert]:[simul out] Simul out none letterbox down anamorphic down centercut down No video output conversion Letterbox, from HD1080 to SD Anamorphic HD1080 to SD Centered, from HD1080 to SD 720p to 1080p cross HD720 to HD1080 anam
Update preferences tab [setup][update] Update preferences tab [setup]:[update] The update tab opens the software update [update] and feature license key entry [keys] menus. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 72 manhattan_aerial Battery 44% last take 3:22 next: reel3_015.
Update preferences tab, continued [setup][prefs] Update preferences tab [setup]:[update] update Troubleshooting the update process, continued. long lat alt temp -74.0715 Frame 1080p YUV10 40.416 Fps 23.98 51.166 Codec CineForm 1.1MB/frame 27.3MB/s 72 manhattan_aerial Battery 44% last take 3:22 next: reel3_015.mov Media 3GB Free 3GB Remain record slate SDI safe If the error message, “no update.exe found” appears: grid No update.
General preferences tab [setup][prefs] General Preferences [setup]:[prefs] prefs input files loss stop drop stop TC conv input prefs fan ctrl battery meter restart app main low Anton Bauer exit app grid Digi View GPS mouse mouse exit fan ctrl 3Gb/s out Peak vu high 3Gb/s out P not Psf Disable Safe clip reset prefs save prefs load prefs support@cinedeck.com Version 2.0 release build 2.177 main grid clip loss stop [main] Displays general preferences page, shown above.
General preferences tab, continued [setup][prefs] General Preferences [setup]:[prefs] Prefs Fan control, Battery monitor preferences, application control, and save/load preferences. Preferences is the default tab when setup is invoked.
Appendices: Field Operating System Restore (“Factory Reset”) Instructions: In the case of problems with the operation of the Cinedeck, there are some issues that are related to the operating system and may most simply be solved by resetting the Cinedeck to its factory settings. This is usually the result of changing settings or installing 3rd party software that is not compatible with the Cinedeck version of the Windows Embedded operating system.
Cinedeck Operating System Field Restore Disk Update instructions NB: In general, it is a good idea to keep your restore disk up to date so that in the case of a field restore, your software will be current without installing it separately. The restore disk update file is located at: ftp://ftp.dbox.com username: cinedeckupdate password: update123 Folder: Restore Disk Update NB We suggest an FTP client like filezilla or similar for the download.
Cinedeck Bootable BIOS Update Disk Creation Instructions Download location for the BIOS update disk components: ftp://ftp.dbox.com username: cinedeckupdate password: update123 Folder: BIOS_disk Making the BIOS update USB thumb drive: [COMMANDS shown in Blue] 1) Format the thumb drive: 1. Open a command prompt window 2. Type: DISKPART This will start the disk partition program. 3. Type: LIST DISK This will list the available disk partitions to format. 4.
Breakout cable connections RS 422 Deck Control XLR Analog Audio Out XLR Analog Audio Out XLR Analog Audio In XLR Analog Audio In RY in Y in BY in Ref In RY Out Y Out BY Out AES/EBU in AES/EBU out
Cinedeck I/O Pin Definitions: Serial numbers 500 and higher.
Setting up the docking station for use with the Cinedeck Extreme The Cinedeck eSATA & USB Docking Station easily connects all 2.5" or 3.5" SAT hard drives, allowing PC or MAC system to instant access and store data. Features: Specifications: • Supports all 2.5" & 3.5" SATA HDDs • Model#: ST0005U • Interface: SATA to eSATA / USB 2.0 • USB 2.0 Transfer Rate: up to 480 Mbps • Supports USB 2.
Care and feeding of SSD media SSD media is different from traditonal spinning hard drives in two important ways. 1) 2) Low level formatting has an adverse affect on the flash media Disk optimization is achieved by “trim” rather than “degragmentation”, and with certain controllers, the “secure erase” process. Restoring SSD media to “factory new” performance SSDs will lose performance over time, which will have a negative impact on recording capability.
Setting up new SSD media for use with the Cinedeck Extreme SSD media purchased from any other vendor must be prepared before use with the Cinedeck EXTREME to disable write caching on the device and to format it using the correct file system. All data on the SSD will be lost in preparation for use with the Cinedeck EXTREME. Perform these functions on the Cinedeck EXTREME itself, rather than attempting to perform them on a computer; this is necessary to ensure proper functionality.
Setting up new SSD media for use with the Cinedeck Extreme, continued 11. In the window that appears, click the Policies tab. 12. On the Policies page, UNCHECK Enable write caching on the disk. 13. With Enable write caching on the disk now UNCHECKED, click OK on the bottom of the window to confirm. 14. Click OK on the bottom of the Hardware page to confirm. 15. Context-click again on Disk 1 (NOT Disk 0), your new SSD.
Using the Patriot trim utility for Patriot Torqx SSD media
Using the OCZ trim/garbage collection utility The OCZ trim or garbage collection utility can be used with the following SSDs 1) 2) 3) 4) 5) Vertex (not Vertex2) Vertex Turbo Vertex EX Agility series Solid 2 series
OCZ Vertex2 Secure Erase process for restoring SSD performance The secure erase process can be used with the following SSDs 1) 2) 3) Vertex2 Vertex LE Agility2
Setting the battery meter COM port Exit to the windows desktop and go to [start][my computer] This will open an explorer window Select folder view Right-click “my computer” and select “manage” This will open the management window Select the device manager Expand the “ports (COM & LPT)” menu Double-click the “USB serial port (COMxx)” item This opens the device properties window
Setting the battery meter COM port, continued Select the “port settings” tab, then select “advanced” properties from the “COM Port Number” pulldown, select port 6 Ignore the “(in use)” notation Exit the advanced settings tab by selecting “ok” Exit the COM properties settings tab by selecting “ok” input files loss stop drop stop GPS TC conv input prefs fan ctrl battery mon restart app main low Anton Bauer exit app grid Digi View mouse mouse exit med 3Gb/s out Peak vu high 3Gb/s ou
Codec installation on the MAC and PC Codec download locations for playback of material recorded on the Cinedeck: ProRes Apple quicktime codecs for Mac and PC PC: http://support.apple.com/downloads/Apple_ProRes_QuickTime_Decoder_1_0_for_Windows Mac: http://support.apple.com/downloads/Apple_ProRes_QuickTime_Decoder_1_0_for_Mac DNxHD (Quicktime) Avid Quicktime Codecs for Mac and PC mac/pc: http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=372311 Uncompressed Codec for Mac and PC Mac/PC: http://www.
Average data rates Prores
Average Data Rates
Average Data Rates CineForm Cineform -‐ High Cineform -‐ Film Scan 1 Cineform -‐ Film Scan 2 Cineform -‐ Keyscan CineForm -‐ Uncompressed 444 Cineform -‐ Medium Cineform -‐ High Cineform -‐ Film Scan 1 Cineform -‐ Film Scan 2 CineForm -‐ Uncompressed 422 CineForm -‐ Uncompressed RAW Cineform -‐ High Cineform -‐ Film Scan 1 Cineform -‐ Film Scan 2 C