CINEGEARS MULTI AXIS FOLLOW FOCUS KIT V3 MANUAL BOOK © 2017 Cine Gears INC. All Rights Reserved.
Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, Cine Gears Inc. reserves the right to make changes to the products described in this document without notice. Cine Gears Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. FCC Compliance Notice: Radio Frequency Notice The device has met the FCC 15.247 requirement.
Information to the user The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Instructions Materials The Follow Focus system is made from an aluminum alloy using precision CNC machining. The design allows the drive gear to be installed on both sides of the lens, enabling multiple drives. The product uses an accurate and precise DC servo motor and 32-bit high-speed control chips. It has an input voltage range of +12V to 30V, with an automatic voltage regulator circuit inside the controller. Synchronization Turn on the remote control power switch and plug in the motor.
Instructions Remote Record Triggers Press (REC) on your controller to toggle Recording mode ON or OFF. Recalibrating your Controller Rotate the focus ring clockwise to the end; hold (SET) + CODE + (REC) buttons together for 3 seconds. Rotate to the opposite end and press the three buttons again.
Disclaimers FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Disclaimers Terms and Conditions Congratulations on purchasing your new CINEGEARS product. Please read this manual carefully before using the product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using CINEGEARS products, and for any consequence thereof.