User Manual

No Output on Display

Check the TX and RX power rst, then check if TX antenna and RX antenna is installed

correctly.

Next, check ‘Video’ indicator. If TX ‘Video’ indicator is not lit, check if the SDI or HDMI cable is

plugged in and the video source is ready.

Finally, conrm that the input video format is compatible with the product specications.

Poor Quality Output Video

Ensure the SDI or HDMI input cable is properly connected, then check how many

receiver-side ‘RSSI’ LEDs are lit. Ideally, 2 or more LEDs should be lit for optimal video quality.

If there is 1 or 0 LEDs lit, the received wireless signal is too weak for proper transmission. Try

to reduce transmission distance, or try changing the broadcast frequency channel in case

the current channel is experience interference.

Troubleshooting