User Manual

Cautions

Please read this user introduction manual to become familiar with the features of the Ghost-Eye series

products before operation. Failure to operate the product correctly can result in damage to the product,

or interference with other devices. This is a sophisticated product which must be operated with caution and

common sense. Failure to operate this product properly might result in disturbing other film equipment on set.

This product is not intended for use bychildren without direct adult supervision. Do not use with incompatible

components, or alter this product in any way outside of the documents provided by Ghost-Eye. These safety

guidelines contain instructions for installation, operation, and maintenance. It is essential to read and follow

all of the instruction in the manual, and all the notices and warnings regarding Ghost-Eye series products

prior to assembly, setup, or use to prevent any damage or interference.

1. Do not use this product in extreme heat, cold, dusty, or humid environments.

2. Prevent friction against hard objects.

3. Prevent jarring, such as from falling from high places, or from improper packaging during transportation.

4. These products are not waterproof; prevent moisture from getting in, on, or around the unit(s).

5. Do not dismantle, assemble, or otherwise alter the product(s) arbitrarily.

1. When this device is sharing a power supply or battery with other equipment, please make sure all signal

and power cables are well connected before turning on the Ghost-Eye unit power.

2. When this device is sharing a power supply or battery with other equipment, please make cables from the

Ghost-Eye unit.

3. When this device is sharing a power supply or battery with other equipment, please check the polarity of

the power connectors of all equipment to ensure the inside conductor is positive. If the polarity of the power

connector is unknown, please check the user manual to make sure the outer conductor of the SDI or HDMI

connector is connected to the negative of the power supply. Otherwise, the equipment will not be able to

share the same power supply withthe Ghost-Eye unit.

Warning

Electrical Considerations