User's Manual

Structure

1 Antenna socket

SMA socket to connect the antennas.

2 LCD Screen

Display the information about the Channel, signal input, capacity, signal status.

3 Menu

Unlock the screen and confirm the selection.

4 Left

Select the correct Channel.

5 Right

Select the correct Channel.

6 BAT-out

Btap battery power supply.

7 HDMI OUT

Connect to the TV/Monitor via the HDMI cable.

8 SDI OUT

Connect to the TV/Monitor via the HDMI cable.

9 Power supply In (Lemo)

Support connecting to the power supply of the camera, or power adaptor.

Notice: DO make sure the Voltage (+)(-) was connect correctly.

10, 13 1/4 Hot-shoe Connection

Support to connect with more methods.

11 Power ON/OFF

Power ON/OFF

12 V-mount battery Clip

Support V-mount battery to power supply.

Receiver