500M WIRELESS HDMI/SDI VIDEO TRANSMISSION SYSTEM GHOST EYE MANUAL BOOK © 2018 Cine Gears INC. All Rights Reserved.
Trademarks Ghost-Eye Wireless Video Transmission SystemsTM are trademarks of Cine Gears Inc. Web Interface. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, Cine Gears Inc. reserves the right to make changes to the products described in this document without notice. Cine Gears Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.
Contents About the User Manual Brief introduction Contents Features Specification Interface Information Quick Start Guide About the User Manual LED Digits Display description Brief introduction Application Recommendations Trouble shooting Disclaimers About Cinegears © 2018 Cine Gears INC. All Rights Reserved.
Introduction About About the Userthe Manual User Manual - Please read this manual carefully before you use this product and retain it properly for future reference. - If there is any question or difficulty about the operation of product, please feel free to contact us or the dealer. - The company reser ves the authority to modify the instruction manuals.
Specification Specification Specification Specification Item Frequency Image transmission：5.1~5.9GHz Bandwidth 40MHz Video Formats 1080P 23.98/24/25/30/50/60 1080i 50/59.94/60 576P 576i 480p 480i Audio Formats PCM Time Code ATC_VITC Transmission distance Up to 500m 300m Antenna External antenna * 2 Transmission Power 17dBm Interface HDMI input,SDI input, Mini-USB,Lemo(0B/2pin) DC in, Antenna RPSMA, Power switch 1080psf 23.98/24/25 720P 50/59.
Interface Information Interface Information Transmitter Interface Interface Information Interface Information Model：7059 Transmitter Interface Model：7059 5.8G Antenna Interface 5.8G Antenna Interface LED Digits Display LED Digits DisplayOK Button CH Button OK Button Mini USB CH Button Mini USB HDMI in V-MOUNT HDMI in SDI in V-MOUNT SDI in DC-IN DC-IN 5.8G Antenna Interface 5.8G Antenna Interface V-MOUNT V-MOUNT Power Switch Power Switch 05 05 © 2018 Cine Gears INC. All Rights Reserved.
Interface Information Transmitter Interface Description ransmitter Interface Description Specification Item LED Digits Display Item OK Button LED Digits Display CH Button OK Button Mini USB CH Button HDMI IN Mini USB SDI IN HDMI IN SDI IN DC-IN DC-IN Display the working channel 1~9, A(10), b(11) Specification Confirm the function selection Display the working channel 1~9, A(10), b(11) Switch the working channel Confirm the function selection Be used for software upgrading Switch the working chann
Interface Information Receiver Interface Model：3059 Receiver Interface Model：3059 5.8G Antenna Interface 5.8G Antenna Interface LED Digits Display LED Digits Display OK Button CH Button V-MOUNT OK Button CH Button Mini USB SDI Out Mini USB V-MOUNT SDI Out HDMI Out HDMI Out DC-IN DC-IN 5.8G Antenna Interface 5.8G Antenna Interface V-MOUNT V-MOUNT Power Switch Power Switch © 2018 Cine Gears INC. All Rights Reserved.
Interface Information Receiver Interface Description eceiver Interface Description Specification Item LED Digits Display Item Display the working channel 1~9, A(10), b(11) Specification Button (DualConfirm thechannel function selection/Switching between LED DigitsOK Display Display the working 1~9, A(10), b(11) function button) normal mode and enhanced anti-interference mode OK Button (DualConfirm the function selection/Switching between Switch workinganti-interference channel CH Button normal mode un
Quick Start Guide TX Product Installation Product Installation Transmitter InstallationProduct Steps: Installation Installation 1. Fix the antennas and Transmitter adjust their angles as shown in theSteps: figure below. (For details, please refer tothe theantennas transmission distance description.) 1. Fix and adjust their angles as shown in the fi (For details, please refer to the transmission distance des Notice: please rotate the golden mental part of antenna to fasten the antenna.
Quick Start Guide wer switch to start g. 3. Turn on the power switch to start Installation power supplying. ON turn on OFF turnPower off Switch: ON turn on OFF turn off tton to select the corresponding working channel of en press “OK” button for confirmation.The LED digits working channel of 4.Press “CH” button to select the corresponding lay onereceiver of the characters ~ 9, A and b when the video and then from press1“OK” button for confirmation.The LED digits is normal.
Quick Start Guide RX Receiver Installation Steps: 1. Fix the antennas and adjust their angles as shown in the figure below. Notice: please rotate the golden mental part of antenna to fasten the antenna. 2. Connect RX with the monitor via corresponding power cable and HD video cables as shown in the figure below. SDI HDMI SDI OUT SDI monitor HDMI OUT DC DC IN 7V-36V 11 © 2018 Cine Gears INC. All Rights Reserved.
Quick Start Guide 3. Turn on the power switch to start power supplying. Power Switch: ON turn on OFF turn off 4. Press “CH” button to select the corresponding working channel of receiver and then press “OK” button for confirmation.The LED digits display will display one of the characters from 1 ~ 9, A and b when the video signal of device is normal; the monitor will display the image from camera simultaneously. © 2018 Cine Gears INC. All Rights Reserved.
Quick Start Guide 5. RX supports switching between normal mode and enhanced anti5.
LED Digits Display description LED Digits description LEDDisplay Digits description Display description LED Digits Display ED Digits Display LED Digits Status Display Status , wer Indicator Power Indicator Video Indicator Video Indicator LED Digits Display LED Digits Display : SDI Audio Input TX : SDI Audio Input Mode Indicator Mode Indicator : Normal/Enhanced RX : Normal/Enhanced Anti-interference Anti-interference Mode Indicator Mode Indicator Transmitter Transmitter ED Digits Display: Channel 1 ~
LED Digits Display description Receiver Receiver LED Digits Display: Channel 1 ~ 9, A, b LED Digits Display: Channel 1 ~ 9, A, b Video Indicator: HDMI and SDI outputs are enabled together, Video Indicator: HDMI and SDI outputs are enabled together, there are two status of the indicator there are two status of the indicator 1：Red and Yellow light together : RX receives the signal from TX normally, 1：Red and Yellow light together : RX receives the signal from TX normally, and HDMI and SDI outputs are workin
Application Recommendations Application Recommendations Application Recommendations Application Recommendations Application Recommendations Application Recommendations In order to reach the best performance of wireless transmission, In order to reach the best performance of wireless transmission, we recommend to meet the requirements as follows: we recommend to meet the requirements as follows: 1. The vertical height of TX and RX should be same and more than 1.5m 1.
Application Recommendations 2.Recommended Method u 2.
Application Recommendations 3. Recommended ended Installation MethodInstallation Method under Non-ideal Position -ideal Position When the front side of the transmitter is not able of the transmitter is not able to face to the receiver, please try to adjust the r, please try to adjust the direction of transmitter antennas to make sure er antennas to make sure that the formative fan-shaped arrangement n-shaped arrangement can face to the receiver for best signal transmission.
Trouble shooting Trouble shooting Trouble Trouble shooting shooting Display“Link Connecting” Display“Link Connecting” 19 19 © 2018 Cine Gears INC. All Rights Reserved.
Trouble shooting Image displayed,No audio d Audio o Video source mute Turn on the audio of video source Volume too low Turn on the audio of video source Turn up the audio of video source Audio format supported Turn not up the audio of video source Switch the format of video source output Something wrong with transmitter/ Switch the format of video receiver source output Restart the transmission kit nsmitter/ receiver Restart the transmission kit *For more questions, please contact the distrib
Disclaimers FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Disclaimers Terms and Conditions Congratulations on purchasing your new CINEGEARS product. Please read this manual carefully before using the product. By using this product, you hereby agree to this disclaimer and signify that you have read it in full. You agree that you are responsible for your own conduct and any content created while using CINEGEARS products, and for any consequence thereof.
About Cinegears Cine Gears Inc. is an industry leading company that designs and manufactures digital wireless follow focus systems, lens control systems, camera motion control systems and accessories for film and broadcast industry. As a big believer in the power of creativity and ideas, we designed the Pegasus cablecam, the wireless motor drive that integrated a built in wireless transmitter, and the wireless finger wheel controller. The Cine Gears Inc.
