User Manual

© 2016 Cine Gears INC. All Rights Reserved. 21
User Manual
Setting Up the Intercom (for 800T only)
After connecting the units, power on both Transmitter and Receiver.
On the Transmitter side, you will hear sound from the receiver end if “TALK” is not
pressed on converter box.
When the “TALK” button is pressed and held, both the receiver end and the transmitter end
can conversation normally.
The receiver end can hear “call sound” when the operators on the Transmitter side
press down the “CALL” button on CALL box.
When TALLY is triggered via a professional broadcast switcher, the OLED area on the receiver
glow red. At the same time, the “TALLY” LED will be lit on the Transmitter (You can also insert
your wrist indicator if desired).
Note: The external TALLY ( wrist LED) interface only supports LED lights at 3.3V@20mA.
Intercom System Pairing
Transmitter (TX) side: Press “MENU” button first, then press “UP” or “DOWN” buttons to choose
“Talk Pair” on screen and press “MENU” button again to confirm.
Receiver (RX) side: Press “VOL-” button first, then press “RIGHT” button to start intercom pairing.
Transmitter (TX) side will auto restart, Receiver(RX) side should be manually restarted.
When both sides are restarted, Intercom system pairing is complete.