Spec sheet

Cineo Lighting continues to pioneer Remote Phosphor
technology for image capture with HS
2
, the second
generation of the revolutionary HS  xture currently in
use on motion picture sets and in broadcast studios
worldwide. All HS
2
components are 100% cross-
compatible with all legacy HS  xtures, accessories,
phosphor panels, and cabling.
The HS
2
lamphead features an integrated design, an
improved safety switch and 80/20 mounting slots to for
attaching the yoke and accessories. Two distinct mixing
chambers allow custom CCT mixing via DMX. New
hinged top access panel allows for easy phosphor panel
and accessory changes. Maximum output is 25,000
lumens.
The RDM450 is smaller and lighter weight than the
legacy power supply and features completely re-
designed electronics for improved reliability. Other new
features include digital display and control, remote
programming via RDM,  ne dimming, smooth dimming
and strobe capability. The RDM450 can be attached
directly to the HS
2
head for one-piece operation or
operated remotely up to 300 feet from the  xture.
HS
2
is also uniquely suited for green and chroma key
applications. Traditional white  xtures waste 70% or
more of the light when used to light green or blue
screens, while HS
2
translates 100% of the available light
into optimized green or blue light. In addition the Cineo
HS
2
features 2 light mixing chambers, making it possible
to convert 50% of the  xture to green and the other 50%
to either tungsten or daylight.
HS
2
represents Cineo Lighting’s commitment to constant
innovation of illumination technology. This second
generation tool builds upon Cineo’s years of experience
in Remote Phosphor Technology while continuing to
provide the unexcelled brightness, extremely accurate
color quality, power effi ciency, and  exibility that
hundreds of cinematographers, gaff ers, and lighting
designers rely on daily.
HS
2
Lamphead Features
Utilizes Remote Phosphor Technology (RPT) for accurate,
consistent output
Fully compatible with all legacy HS power supplies,
accessories, phosphor panels, and cabling
Local and DMX dimming 0-100% with no color shift
80/20 mounting slots on both sides and back
Two mixing chambers provides custom CCT mixing
Hinged top access panel for easy operation
Output is identical to legacy HS  xture
Speci cations
Input voltage: 100-240 VAC 50/60 Hz.
Power consumption: 500 watts, max
Lamp head dimensions: 12” H x 21” W x 3.8” D
(290 mm x 532 mm x 96.5 mm)
Lamp head weight: 14 lbs (6.4 kg)
RDM450 PSU dimensions: 3” H x 13” W x 9.5” D
(76 mm x 330 mm x 241 mm)
RDM450 Weight: 11 lbs (5 kg)
35,000 hr. L70 rated
Environmental temperature range: -20º - + 50º C
Max. temperature rise: +45º C
2-year parts and labor warranty
ETL and cETL Listed, CE and RoHS Compliant
Zero UV light emitted
Made in USA
2
RDM450 Power Supply Features
Completely re-designed electronics improves reliability
Smaller, lighter weight than previous power supplies
Improved digital display and control
Remote DMX address programming via RDM
Operates up to 300’ from  xture
Optionally attaches directly to the HS2 head
Smooth Dimming (0-100%) and strobe capability
Fine dimming mode available via DMX
Flicker-free completely silent operation
Remote Phosphor