Cineroid Model : EVF 4L EVF 4B Cineroid Korean User Manual English Electronic View Finder
SECULINE Co., Ltd Thank you for purchasing the Cineroid EVF. The Cineroid EVF (hereafter referred to as“EVF”) is a view finder that can be mounted on any video camera with a HDMI output signal. Please thoroughly read the user manual for best operation and understanding of all of the functions of the EVF. Test Before Operating It is recommended to test the EVF before operating. Check if the EVF can be turned on once powered, and check if the information/menu is being properly displayed on the LCD.
SECULINE Co., Ltd Safety Precautions Please observe the following safety precautions as they are meant for the safe and proper use of the product to reduce the risk of accidents. Upon reading the user manual, keep it in a safe and available place. Do not face the eyecup directly into the sun as it may damage the LCD. English ! WARNING ◎ Do not use any batteries, power cord, or accessories that are not specified in this document. ◎ When using a power cord, be sure to plug it in completely.
SECULINE Co.
SECULINE Co.
SECULINE Co., Ltd Components Please ensure all parts are present after opening the box. B. Battery Cover C. Battery A. LCD VF + Optical Loupe D. Battery Charger E. Mini HDMI Cable F. Mini Shoe Mount Adapter G. User Manual 06 EVF4 H.
SECULINE Co., Ltd Parts Menu Button Battery Cover English Analog A/V input Eye Cup Power Switch External Speaker Feature Buttons 3.5φ Headphone Jack Diopter Adjuster 1/4”Screw Mount 3.
SECULINE Co., Ltd Before Using the EVF Detachable Optical Loupe 1. The optical loupe attached to the EVF body can be flipped open 180 degrees or detached completely. 2. To open the optical loupe, firmly grasp the loupe and flip upwards. When it is fully open, the loupe will stay fixed on top of the body. 3. To completely detach the loupe from the body, simply slide the small latch to the left and lift up the loupe. To replace the loupe, slide the small latch to the left and place the loupe back into place.
SECULINE Co., Ltd Before Using the EVF Connecting External Power External power is supplied through the use of the PA01 adapter. Proper voltage for external power is 6-17V. To install the PA01 adapter, first remove the battery from the body. Connect the external power cable to the PA01 adapter, as illustrated in the picture below. Install the PA01 adapter to the body using the same method as installing the battery. You can use the Canon LP-E6 battery with the PA01 adapter installed. Powering On/Off 1. 2.
SECULINE Co., Ltd Before Using the EVF Adjusting the Diopter 1. When viewing through the optical loupe, the user can adjust the diopter accordingly. Turn on the EVF and verify the LCD image output. 2. Rotating the dial to the right will bring the eye cup towards you and rotating it to the left will move the eye cup away from you. 3. Rotate the dial in either direction until the image becomes clear. Connecting a HDMI Cable 1. Make sure the EVF input selection is set to HDMI.
SECULINE Co., Ltd Before Using the EVF Connecting a Composite Cable Left Audio Video Ground Right Audio 3.5mm dia 4-pole plug Connecting an External Monitor (EVF4L) 1. The EVF4L model provides a HDMI loop-through function. The image on the LCD can be directly looped to an external monitor via a separate mini-HDMI cable. 2. Connect the mini-HDMI input cable to the EVF HDMI in. 3. Connect a separate mini-HDMI cable from the EVF HDMI out to an external monitor. 4.
SECULINE Co., Ltd Basic Features Operating the Menu 1. Access the setting and features by pressing the menu button on the left side of the EVF. 2. Press the M button to select the main menu. When not in the menu, you can adjust the speaker volume by pressing the up and down arrow keys. 1 2 Up Down Menu M ON OFF Exit Input Select Color Adjust Screen Adjust Volume Peaking Saturation(Zebra) Under Scan 4:3 Guide Bar Pixel to Pixel Ver 1.2 3.
SECULINE Co., Ltd Basic Features Input Selection 3 English 1. You can choose between composite and HDMI for your external input selection. 2. The HDMI input can receive 480i, 480p, 576p, 720p and 1080i signals. 3. Press the M button for the main menu. Move the cursor to INPUT SELECT and press the M button. Choose either HDMI or Composite. 4. Highlight and select Exit to return to the main menu.
SECULINE Co., Ltd Basic Features Adjusting the Screen 1. You can adjust the LCD brightness, contrast, and sharpness. Choose between 0-50 for the brightness and contrast and 0-10 for the sharpness. 2. Press the M button for the main menu. 3. Select SCREEN ADJUST choose between BRIGHTNESS, CONTRAST, and SHARPEN to adjust your screen. 4. A preview window will appear on the lower right portion of the screen as you adjust your screen.
SECULINE Co., Ltd Shooting Features Peaking 2 3 PK F1 F2 SA Exit Input Select Color Adjust Screen AdjustExit Volume Peaking Mode [R,S] Peaking Threshold [1~5] Saturation(Zebra) Under Scan 4:3 Guide Bar Pixel to Pixel Peaking Mode 설정 Peaking Red OFF Peaking Red ON Peaking Sharpness OFF Peaking Sharpness ON R 05 tip Peaking Mode : R → Red S → Sharpness EVF4 15 English 1. The EVF provides the peaking feature in both the Red and Sharpness mode.
SECULINE Co., Ltd Shooting Features Saturation(Exposure) 1. You can use the saturation feature to determine proper exposure. 2. To activate the saturation feature, press the SA button on the left side of the EVF body. Under exposed areas are displayed in white and over exposed areas are displayed in the black diagonal lines. 3. Proper exposure is displayed in the opposite diagonal lines. 4.
SECULINE Co., Ltd Shooting Features Pixel to Pixel Exit Input Select Color Adjust Screen Adjust Volume Peaking Saturation(Zebra) Under Scan 4:3 Guide Bar Pixel to Pixel English 1. Enabling pixel to pixel eliminates the need for you to zoom in/out of your native video. 2. If the native video is larger than the LCD resolution then that creates a zooming effect. Conversely, if the native video is smaller than the LCD resolution then that creates a scale-down effect. 3.
SECULINE Co., Ltd Shooting Features 4:3 Guide bar 1. The aspect ratio of the EVF screen is 16:9. Activating the guide bar will provide a 4:3 ratio by making both ends of the screen area a little darker. 2. Once you active the guide bar from within the menu, the right side and left side of the screen area will become slightly darker. The unchanged area of the screen is the 4:3 aspect ratio.
SECULINE Co., Ltd Setting User Controls Custom Button Functions 1 3 PK Peaking F1 Monochrome F2 Underscan SA Saturation Monochrome Screen Filp Status Display Custom Setup Exit Pixel to Pixel F1 F2 PK SA Exit Freeze Pixel to Pixel √ Monochrome 4:3 Guide Bar Under Scan Screen Flip Mirror Screen Flip Rotate Brightness Contrast EVF4 19 English 1. The left side of the EVF body contains the buttons PK, F1, F2, SA.
SECULINE Co., Ltd Setting User Controls Custom Display Settings 1. 2. 3. 4. You can select to view the current state of the battery usage, volume, etc. on the LCD. Press the M button for the main menu and select STATUS DISPLAY to view the options. Select ON or OFF for each item you want to view or not view on the LCD. The pixel to pixel display only appears when the feature is activated.
SECULINE Co., Ltd Product Specifications Size Resolution Color LCD Viewing angle Input HDMI Composite Video output Audio out Power HDMI Phone Jack Internal speaker Battery External Operating Temperature Storage Temperature Power consumption 800 x 480 16.7M H: 180 degrees, V: 180 degrees 69.6(H) x 41.76(V)mm English Display area 3.2inch TFT LCD (480i/480p/576p/720p/1080i) Video/Stereo Audio (480i/480p/720p/1080i/1080p) 3.5φ Analog stereo Mono Output Small, Medium, Large DC 6.
SECULINE Co., Ltd Optional Products ○External power adapter External power or Canon LP-E6 battery can be used.
SECULINE Co.
Cineroid Cineroid Electronic View Finder We will strive to create the best products and provide superb service. Customer Support Center Seculine Co., LTD. Tel +82.2.850.3021 / Fax +82.2.850.3027 Rm.510, Kolon Science Valley #2, Guro-dong, 811, Guro-gu, Seoul, 152-878, Korea Homepage www.cineroid.com E-mail support@secu-line.com EVF1.
