ON CAMERA LED LIGHT Variable Color Temperature High Power LED Light Source Dimming Brightness 30 steps Attachable Battery Connecting External Power Support for variety Accessories User’s Manual English LM200
ON CAMERA LED LIGHT Cineroid LM200 Thank you for purchasing the Cineroid LED light. The Cineroid LED employs a very high color rendering index (CRI). It displays a very stable color temperature and brightness so that both motion pictures and still images can be taken in their most natural color tones. Please read this user manual thoroughly before using the Cineroid LED. Test Before Operating It is recommended to test the Cineroid LED before use.
ON CAMERA LED LIGHT Cineroid LM200 Safety Precautions Please observe the following safety precautions as they are meant for the safe and proper use of the product to reduce the risk of accidents. Upon reading the user manual, keep it in a safe and available place. English ◎ Do not use any batteries, power cord, or accessories that are not specified in this document. ◎ When using a power cord, be sure to plug it in completely. Do not handle power plugs when your hands are wet.
ON CAMERA LED LIGHT Cineroid LM200 Table of Contents Safety Precautions 03 Table of Contents 04 Components 05 Names of Parts 06 Installing the Battery 07 Powering On/Off 07 Adjusting Brightness / Color temperature 08 Mounting Diffuser Pannel 09 Connecting External Power 09 Product Specification 10 Optional Products 10 04
Cineroid LM200 ON CAMERA LED LIGHT Components Please ensure all parts are present after opening the box. English A. LM200 Body D. Diffuser pannel C. Battery Mount E. User's Manual C. Mini Ball Head F.
Cineroid LM200 ON CAMERA LED LIGHT Parts DC in LED Power switch Color temp. display Color temp.
Cineroid LM200 ON CAMERA LED LIGHT Installing the Battery English 1. Attach the battery mount to the back of the body with the use of the two screws on the mount. 2. Connect the cable on the battery mount to the body. 3. Attach the battery to the battery mount. 4. Be sure to charge fully the battery before installing. 5. Sony NPF Type battery is compatible. Powering On/Off 1 2 3 1. Push the power switch “ON” to turn on the LED light. 2. Check if the information is displayed properly. 3.
ON CAMERA LED LIGHT Cineroid LM200 Adjusting Brightness / color temperature value A B A. Adjusting color temperature 1. The LM200 can be changed color temperature by color temperature switch. 2. LCD displays color temperature value from 9 to -9. 3. The highest value on the LCD is 9 that represents daylight and -9 is tungsten. Daylight 9 (LCD Value) Tungsten -9 (LCD Value) The highest color temperature The lowest color temperature B. Adjusting Brightness 1.
Cineroid LM200 ON CAMERA LED LIGHT Mounting the diffuser pannel English 1. Mounting the diffuser pannel will prevent the light from spreading to the sides. Connecting External Power DC in 6 ~17 V 1. In addition to the rechargeable battery, external power sources can also be used to power the light. 2. 12V, 3A power is recommended for external power. 3. Remove the battery mount plug from the body. 4. Insert the power plug from the external power source.
Cineroid LM200 ON CAMERA LED LIGHT LM200 Specification Size 152 x 94 x 35 mm Power input 6 ~17 V Light angle 120 degree Brightness step 30 steps Mount 1/4” Screw mount External power D-tap cable(optional) Weight 281 g (without Battery) Display info. Brightness, Channel, Color Temp., Error warning Photometric 720 Lux / 1m Color Temp.
ON CAMERA LED LIGHT Cineroid LM200 Memo English 11
LM200 ON CAMERA LED LIGHT Customer Support Center Seculine Co., LTD. Tel +82.70.4347.4901 / Fax +82.2.850.3027 SECULINE CO., Ltd. Room.510, 55 (Kolon Science Vally #2), Digital-ro 34-gil, Guro-gu, Seoul, KOREA 152-728 Homepage www.cineroid.com E-mail support@secu-line.com LM200-1.
