Troubleshooting guide

Troubleshooting Guide
145
Application Launch Issues
Application is not visible after launch
Cingular Communication Manager is designed to launch into the display
state from which it was last exited. As such, it is possible that the Client
will launch directly to its minimized state, causing the user to assume that
it is not actually running.
Resolution
Look in the system tray for the signal icon. If that icon is present, double
clicking it will display the main Communication Manager user interface. In
addition, a right click on the signal icon in the system tray will raise a
menu. The show item in this menu will have the same effect as the double
click.
Auto launching of Communication Manager at Startup
The Cingular Communication Manager installation can be setup to allow
the Communication Manager to automatically launch when a computer
boots up or when a new user logs into the machine. This may (or may not)
be the desired functionality for the end user.
Resolution
The user can change this behavior of Cingular Communication Manager by
selecting Tools>Settings and choosing the Advanced Settings tab. Select
Auto start check (or uncheck) the box to automatically launch Cingular
Communication Manager.