Troubleshooting guide

Connecting to Wi-Fi Networks

9. Check Allow authentication using a certificate.

10. Close the configuration dialog by pressing OK.

11. Close the Edit Profiles window by selecting OK.

12. Close the Network Profiles window by selecting Close.

To connect to the configured network using EAP-TTLS, re-insert your Wi-

Fi card, and connect to the configured network. You may be asked to

choose the certificate to use with EAP-TTLS, in which case you should

select the one that was issued to you. The Cingular Communication

Manager will display Obtaining IP address while it attempts to

authenticate you to the network.