Printer User Manual

Programming Reference
VERSAJET
For UPC-A (m = 0, 65) process
 Modular check character is processed as follows:
 Automatically added when processing data is 11 bytes.
 The 12th byte data is processed as a modular check character when processing data
is 12 bytes. In this case, modular check character is not checked.
 Left guard bar/center bar/right guard bar are added automatically.
For UPC-E (m = 1, 66) process
 The first data (d1) is processed as number system character (NSC) so 0 must be
specified.
 If n is out of the specified range or if n is an odd number when ITF bar code system (m =
70) is selected, this command is canceled and the following data is processed as normal
data.
 Modular check character is processed as follows:
 Automatically added when processing data is 11 bytes.
 The 12th byte data is processed as a modular check character when processing data
is 12 bytes. In this case, modular check character is not checked.
 Modular check characters are data to decide bar code pattern, they are not included
printing data.
163