FIXED MOUNT SCANNER Programming Manual International Edition, Rev.
Revision History Rev. No. Released Date Rev. A May 26, 2010 First Release Rev. A1 Jun. 18, 2010 Page 16 Page 38 Add “UPC/EAN Security Level” Add “Immediate” parameter (option 5) to "Time Delay to Low Power Mode" and change the default value from 5 seconds to immediate.
Rev. No. Released Date Rev. A7 Nov 04, 2011 Rev.A8 Mar 09, 2012 Rev.A9 Jul 25, 2012 Rev. B1 Programming Manual FuzzyScan Fixed Mount Scan Revision History Aug 20, 2013 Rev. C1 Mar.03 2014 Rev. C2 Jun 23, 2014 Rev. C3 Feb.
© Copyright Cino Group © Copyright PC Worth Int’l Co., Ltd Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains proprietary information that is protected by copyright.
Regulatory FCC part 15B EN55022, EN55024, EN61000-3-2, EN61000-3-3, CNS13438 Industry Canada ICES-003 Clause 3, Article 58-2 of Radio Waves Act. VCCI V-3/2011.
Table of Contents Getting Started Getting Familiar with Your FuzzyScan Connect to Your Host Install Your FuzzyScan Intelli Button Use Your FuzzyScan 1 2 3 4 5 Programming Manual FuzzyScan Fixed Mount Scan Configure Your FuzzyScan Bar Code Programming Manual Programming Procedures Host Interface Selection Symbology Reading Control Keyboard Interface Control Serial Interface Control Operation Control Condensed DataWizard 8 9 13 14 45 50 54 69 Appendix Symbology ID Table Keyboard Function Code Table ASCI
Getting Familiar with Your FuzzyScan Thank you for choosing Cino FuzzyScan Fixed Mount Scanner. Built with FuzzyScan 3.0 Imaging Technology, durable ultra-compact design and rich functionality, it provides an ideal barcode scanning solution for both industrial and general purpose applications. This document provides a quick reference for installation and operation. The complete documentation is available at www.cino.com.tw.
Connect to Your Host USB Models (FM4xx-11x) Universal Models (FM4xx-98x) The USB models provide a plug-and-play solution. Both USB HID and USB COM Port Emulation interfaces are available for user’s choice. The universal models support RS232 and USB interfaces with OK/NG signal outputs and external trigger input. 4-pin Type A Connector Programming Manual FuzzyScan Fixed Mount Scan Both RS232 and USB interfaces are available in different models.
Install Your FuzzyScan Adjust Reading Angle Mount Your FuzzyScan The readability may be impacted by the specular reflection caused by the perpendicular reading angle. To get the most optimal reading performance, you are suggested to install the scanner at an approximate 15° angle to the perpendicular line of the target barcode. However, the reading angle and distance may vary depending on the size and printing quality of barcodes. Side-view There are two M3 mounting holes on the bottom of the chassis.
Intelli Button For normal operation, the Intelli Button of the scanner acts as a manual Trigger Switch. You can press the Intelli Button to scan the corresponding barcode commands to configure your scanner with ease. Moreover, the useful Intelli Button can help you to identify the best mounting position. Please refer to following descriptions for more details.
Use Your FuzzyScan Both FuzzyScan Barcode commands and Serial commands are available to configure your scanner. The FuzzyScan barcode commands are a series of proprietary barcodes which allow you to easily configure the scanner for most applications. Moreover, the FuzzyScan serial commands are ideal for precise and complicated reading control in machine-controllable environments. Please refer to the relevant documentations for details.
Operation Mode area-imaging fixed mount scanner The details of each operation mode supported by FA470 area-imaging fixed mount scanner are listed below. Trigger Mode Under trigger mode, the scanner will turn on the light source to read barcode when it receives an external trigger or a serial trigger ON command.
Operation Mode linear fixed mount scanner The details of each operation mode supported by FM480 fixed mount scanner are listed below. Trigger Mode Under trigger mode, the scanner will turn on the light source to read barcode when it receives an external trigger or a serial trigger ON command. Once the external trigger has been released, or the scanner gets a good read or a serial trigger OFF command, the scanner will stop reading and wait for the next trigger to activate scanning again.
Bar Code Programming Menu System Command The FuzzyScan bar code commands are specially designed Proprietary bar code labels which allow you to set the FuzzyScan internal programming parameters. There are System Command, Family Code and Option Code for programming purpose.
Programming Procedures If the programming family must take multiple scans selection, cycling scan selection, or dual level selection procedures, the family of the programming menu will be marked with the matched representing symbol of Programming Category (P.C.) in bold font listed in the following table. You can easily find the bold mark in the programming menu, and refer to their flowcharts for details.
Program & End System List, Group & Master Default Scan “PROGRAM” Scan “SYSLIST” FuzzyScan will enter programming mode, and inhibit all non-programming functions. FuzzyScan will list the product information and revision number to host via selected host interface, Programming Manual FuzzyScan Fixed Mount Scan then issue the completion beeping.
Single scan selection Scan “PROGRAM” Multiple scans selection Scan “PROGRAM” Enter programming mode. Select one of desired Select one of desired Scan One of Family Codes Scan One of Family Codes programming families. Scan One or Several Option Codes desired parameter. option codes to select desired parameters. 2. If it’s necessary, scan “FIN” to terminate Yes Programming Manual FuzzyScan Fixed Mount Scan programming families. 1.
Cycling scan selection Dual level selection Scan “PROGRAM” Scan “PROGRAM” Enter programming mode. Select one of desired Scan One of Family Codes Scan One of Family Codes programming families. Cycling select one or desired parameters as (2nd) Scan One or Several Option Codes Scan “FIN” Repeat Selection 1. Select one or several parameters. 2. If it’s necessary, scan “FIN” to terminate (If necessary) option code selection.
Host Interface Selection PROGRAM Family Code Selection Programming Manual FuzzyScan Fixed Mount Scan Host Interface Selection F_DEFAULT P.
Symbology Reading Control ♦ User Defined Symbol ID ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ User Defined Symbol ID ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ Symbology ID Transmission ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ Readable Bar Code Setting ♦ PROGRAM Family Code Selection Remember to scan “FIN” to terminate Programming Manual FuzzyScan Fixed Mount Scan Readable Symbology Setting this selection. But if you select the “Auto”, FuzzyScan will terminate this selection automatically. F_DEFAULT P.
Symbology Reading Control ♦ Readable Bar Code Setting ♦ PROGRAM Family Code Selection F_DEFAULT P.C Parameter Selection Option Code Programming Manual FuzzyScan Fixed Mount Scan CS Australian Post B0 Readable Symbology Setting CS British Post B1 CS Intelligent Mail barcode B3 CS Japanese Post B4 CS KIX Post B5 CS Planet Code B6 CS Postnet B8 If your application is known, you may select those known symbologies only to increase the reading speed and decrease the possibility of reading error.
Symbology Reading Control ♦ Code 39/Code 32 Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ Code 39 Setting♦ F_DEFAULT Family Code Selection P.C Code 39 Security Level SS SS SS SS Parameter Selection Level 0 Level 1 Level 2 Level 3 Option Code 0 1 2 3 Code 39 Security Level The scanner offers four levels of decode security for Code39 bar codes: Level 0: If you are experiencing misread of poorly-printed or serious out-of-spec. bar codes in level 1, please select level 0. Level 1: If you are experiencing misread of poorly-printed or out-of-spec.
Symbology Reading Control ♦ Codabar/NW-7 Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ Codabar/NW-7 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Codabar Max. Length SS MS Parameter Selection Default (98) 98-Minimum FIN (2 digits) Programming Manual Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.
Symbology Reading Control ♦ UPC-A & UPC-E Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ UPC-A & UPC-E Setting , Supplement Scan Voting♦ ♦ F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ EAN Setting , Supplement , Supplement Scan Voting♦ ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ UPC/EAN Security Level Setting , EAN Supplement Control♦ ♦ PROGRAM Family Code Selection P.
Symbology Reading Control ♦ UCC Coupon Extended Code Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C UCC Coupon Extended Code SS SS Parameter Selection Disable UCC Coupon Extended Code Enable UCC Coupon Extended Code Option Code 0 1 Programming Manual FuzzyScan Fixed Mount Scan UCC Coupon Extended Code When UCC coupon extended code function is enabled, scanner decodes UPC-A barcodes starting with digit “5”, EAN-13 barcodes starting with digit “99” and GS1-128 Coupon Codes.
Symbology Reading Control ♦ IATA & Interleaved 2 of 5 Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ Code 25 Family Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ Code 11 & Code 93 Setting ♦ F_DEFAULT Family Code Selection P.C Parameter Selection Code 11 Setting SS SS SS SS SS SS SS Disable Code 11 Enable Code 11 Disable check digit verification Select 1-check digit verification Select 2-check digit verification Disable check digit transmission Enable check digit transmission Code 11 Min.
Symbology Reading Control ♦ MSI/Plessey Setting ♦ F_DEFAULT Family Code Selection P.C Parameter Selection MSI/Plessey Setting SS SS SS SS SS SS SS Disable MSI/Plessy Enable MSI/Plessy Select MOD 10 check digit Select MOD 10-10 check digit Select MOD 11-10 check digit Disable check digit transmission Enable check digit transmission MSI/Plessey Min.
Symbology Reading Control ♦ Code 128 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Code 128 Setting SS SS SS SS Disable Code 128 Enable Code 128 ISBT Concatenation Off ISBT Concatenation On Code 128 Min. Length SS MS Default (01) 01-Maximum Option Code 0 1 2 3 FIN (2 digits) Code 128 Max. Length Programming Manual FuzzyScan Fixed Mount Scan Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.
Symbology Reading Control ♦ GS1-128 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection GS1-128 Setting SS SS Disable GS1-128 Enable GS1-128 GS1-128 Min. Length SS MS Default (01) 01-Maximum Option Code 0 1 FIN (2 digits) GS1-128 Max. Length Programming Manual FuzzyScan Fixed Mount Scan Scan 2 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.
Symbology Reading Control ♦ UK/Plessey Setting ♦ F_DEFAULT Family Code Selection P.C Parameter Selection UK/Plessey Setting SS SS SS SS SS SS SS SS Disable UK/Plessey Enable UK/Plessey Select UK/Plessey Standard Format Select UK/Plessey CLSI Format Disable Convert X to A-F Enable Convert X to A-F Disable check digit transmission Enable check digit transmission UK/Plessey Min.
Symbology Reading Control ♦ Telepen Setting ♦ F_DEFAULT Family Code Selection P.C Parameter Selection Telepen Setting SS SS SS SS SS SS Disable Telepen Enable Telepen Select Telepen Numeric mode Select Telepen Full ASCII mode Disable check digit transmission Enable check digit transmission Telepen Min. Length SS MS Default (04) 01-Maximum Option Code 0 1 2 3 4 5 FIN (2 digits) Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.
Symbology Reading Control ♦ GS1 DataBar Setting ♦ F_DEFAULT Family Code Selection P.C Parameter Selection GS1 DataBar Setting SS SS SS SS SS SS Disable GS1 DataBar (RSS-14) Enable GS1 DataBar (RSS-14) Disable GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Expanded Enable GS1 DataBar Expanded GS1 DataBar Min. Length SS MS Default (04) 01-Maximum Option Code 0 1 2 3 4 5 FIN (2 digits) Only available for GS1 Databar Expanded.
Symbology Reading Control ♦ Composite Codes, PDF417/microPDF417, Codablock F Setting ♦ PROGRAM Family Code Selection P.
Symbology Reading Control ♦ Code 16K & Code 49 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Code 16K Setting SS SS Disable Code 16K Enable Code 16K Code 16K Min. Length SS MS Default (01) 01-Maximum Option Code 0 1 FIN (3 digits) Code 16K Max. Length Programming Manual FuzzyScan Fixed Mount Scan Scan 3 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically.
Symbology Reading Control ♦ QR Code Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.C QR Code Setting SS SS QR Code Min.
Symbology Reading Control ♦ Data Matrix Setting ♦ PROGRAM 11Family Code Selection Data Matrix Setting P.
Symbology Reading Control ♦MaxiCode Setting ♦ PROGRAM Family Code Selection P.C MaxiCode Setting SS Disable MaxiCode 0 SS Enable MaxiCode 1 SS MS Default (01) 01-Maximum MaxiCode Min. Length Parameter Selection Option Code FIN (3 digits) Scan 3 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. MaxiCode Max.
Symbology Reading Control ♦ Aztec Code Setting ♦ F_DEFAULT Family Code Selection P.C Parameter Selection Aztec Code Setting SS SS Disable Aztec Code Enable Aztec Code Aztec Code Min. Length SS MS Default (01) 01-Maximum Option Code 0 1 FIN (4 digits) Scan 4 digits from the option code chart in Appendix; then FuzzyScan will terminate this selection automatically. Aztec Code Max.
Symbology Reading Control ♦ Australian Post, US Planet, US Postnet, British Post & Japan Post Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Parameter Selection F_DEFAULT Family Code Selection P.
Symbology Reading Control ♦ Netherlands KIX Code, Intelligent Mail & Korea Post Code Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Parameter Selection F_DEFAULT Family Code Selection P.C Netherlands KIX Code Setting SS SS Disable Netherlands KIX Code Enable Netherlands KIX Code 0 1 Intelligent Mail Setting (USPS 4CB/One Code) SS SS Disable Intelligent Mail Enable Intelligent Mail 0 1 Korea Post Code Setting SS SS Disable Enable Length fixed in 6 characters.
Keyboard Interface Control ♦ Keyboard Layout (Language) Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Keyboard Interface Control ♦ Record Suffix, Preamble, Postamble FNC1 Transmit & Caps Lock ♦ Family Code Selection P.C Parameter Selection Record Suffix SS SS SS SS SS SS None RETURN TAB SPACE ENTER (Numeric Key Pad) User defined character (1 character) Preamble SS MS None 1-15 characters F_DEFAULT Option Code 0 1 2 3 4 5, (00-7F) FIN [00-7F], [FIN] Maximum 15-character input; scan “FIN” to terminate this selection.
Programming Manual FuzzyScan Fixed Mount Scan FNC1 Symbol Char. Transmit: When this function is enabled and the FNC1 is contained in scanned data, the scanner transmits the FNC1 to the host. Chart of theFNC1 is provided in Appendix- Keyboard Function Code Table. When the scanner interface is set to keyboard, the scan code is converted to corresponding key function before it is transmitted.
Keyboard Interface Control ♦ Delay Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Intermessage Delay SS MS Parameter Selection None 1-99 (x5) msec. Option Code FIN (2 digits) Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Intercharacter Delay SS MS None 1-99 (x5) msec.
Keyboard Interface Control ♦ Emulation Setting & Upper/Lower Case Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Function Key Emulation SS SS Parameter Selection Enable ASCII 00-31 code as keyboard function code output Ctrl-Output Option Code 0 1 Programming Manual FuzzyScan Fixed Mount Scan Refer to Appendix – Keyboard Function Code Table for details.
Serial Interface Control ♦ Record Suffix, Preamble, Postamble Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C STX/ETX Control SS SS Parameter Selection Option Code Disable STX/ETX transmission Enable STX/ETX transmission 0 1 Programming Manual FuzzyScan Fixed Mount Scan STX/ETX are two characters used to indicate the starting and ending of the total data frame transmitted via serial interface.
Serial Interface Control ♦ Delay Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Intermessage Delay SS MS Parameter Selection None 1-99 (x5) msec. Option Code FIN (2 digits) Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Intercharacter Delay SS MS None 1-99 (x5) msec.
Serial Interface Control ♦ Protocol, ACK/NAK Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.
Serial Interface Control ♦Time Out Setting, Baud Rate, Data Frame♦ ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Option Code Serial Response Time-out SS SS SS SS SS SS None 200 mseconds 500 mseconds 800 mseconds 1 second 2 seconds 3 seconds 4 seconds 5 seconds 8 seconds 10 seconds 15 seconds 0 1 2 3 4 5 6 7 8 9 A B Baud Rate (BPS) SS SS SS SS 38.4K BPS 19.2K BPS 9600 BPS 4800 BPS 2400 BPS 1200 BPS 57.6K BPS 115.
Operation Control FM480 ♦ Operation Mode Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Family Code Selection P.
Operation Control FM480 PROGRAM P.
Operation Control FA470 ♦ Operation Control, PROGRAM F_DEFAULT Programming Manual FuzzyScan Fixed Mount Scan Presentation Background lighting Control♦ Family Code Selection P.
Operation Control FA470 ♦ Aiming Control, Delay Aiming, Illumination Control, Center Alignment & Decode Aiming Control ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Parameter Selection F_DEFAULT Family Code Selection P.
Operation Control FA470 Family Code Selection P.C Batch Reading SS ♦ Batch Reading ♦ F_DEFAULT Unique Bar CodeParameter Reporting, Batch Reading♦ Selection Option Code None Batch Reading rule input ( 01-16 rules) [FIN] [Rules] [FIN] Batch Reading: When this function is enabled, you can scan multiple barcodes one by one continuously upon one trigger event. The scanner reports a good read beep and indication only if all bar codes set by the “Batch Reading Rule” are read.
[Code length] Length: 4 byte Specify what length of data output will be acceptable for this symbology. When you calculate the length, you must consider the whole data string which includes the programmed Preamble, Postamble, Scanned Data Length, Prefix/Suffix Symbol ID or AIM ID. Scan the four digit data length from the Option Code. Note: 40 characters is entered as 0040; 9999 is a universal number, indicating all lengths.
You would set up the Batch Reading rule with the following command line: [PROGRAM] [Batch Reading] [0301999941FF07999942FF09999943FF] [FIN] [END] Programming Manual FuzzyScan Fixed Mount Scan The breakdown of the command line is shown below: 03 The number of elements in the overall rule 01 Code identifier of Code 128 9999 Code length that must match for Code 128, 9999 = all lengths 41 Start character match for Code 128, 41h = “A” FF End of first code 07 Code identifier of Code 39 9999 Code l
The breakdown of the command line is shown below: 03 The number of elements in the overall rule 01 Code identifier of Code 128 0010 Code length that must match for Code 128 A-CODE128 sample length (9) plus Suffix Symbol ID (1) = 10 41 Start character match for Code 128, 41h = “A” FF End of first code 07 Code identifier of Code 39 0009 Code length that must match for Code 39 B-CODE39 sample length (8) plus Suffix Symbol ID (1) = 9 Universal matched character, indicating all character Programmin
Operation Control FM480, FA470 ♦ Buzzer, Indicator, 1D Barcode Inverse Reading♦ ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Parameter Selection F_DEFAULT Family Code Selection P.
Operation Control FM480, FA470 ♦Dollar Sign, Redundancy♦ ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Parameter Selection F_DEFAULT Family Code Selection P.C Dollar Sign Control SS SS SS SS SS Dollar sign output as “ $ “ Dollar sign output as “ “ Dollar sign output as “ € “ Dollar sign output as “ £ “ Dollar sign output as “ ¢ “ 0 1 2 3 4 Redundancy SS SS SS SS SS SS None Level 1 Level 2 Level 3 Level 4 Level 5 To prevent potential miss reading.
Operation Control FM480, FA470 ♦ Reread Delay & Good Read Delay Setting ♦ PROGRAM Family Code Selection P.C Reread Delay SS SS SS SS SS SS Disable Immediate time out Short time out Medium time out Long time out Force verification 0 1 2 3 4 5 SS SS SS SS SS SS SS None 200 msec. 500 msec. 1 sec. 1.5 sec. 2 sec. 3 sec.
Operation Control FM480, FA470 ♦ Time-out and Duration Setting ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Parameter Selection F_DEFAULT Family Code Selection P.C Scan Input Time-out SS SS SS SS SS MS 100 msec. 200 msec. 300 msec. 400 msec. 500 msec. Hands Free Time-out SS SS SS SS SS Short Medium Long Extremely long Disable 0 1 2 3 4 Good Read Duration SS SS SS SS SS Short Medium Long Extremely long Extremely short 0 1 2 3 4 600 msec. 700 msec. 800 msec. 900 msec.
Operation Control FM480, FA470 ♦ Presentation Sensitivity♦ ♦ PROGRAM Family Code Selection P.C Presentation Sensitivity SS SS SS SS SS Parameter Selection Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 F_DEFAULT Option Code 0 1 2 3 4 5 6 Programming Manual FuzzyScan Fixed Mount Scan The presentation sensitivity is used to configure the sensitivity level when the scanner is set as presentation mode. The higher lever means higher sensitivity for detecting the barcode.
Operation Control FM480, FA470 OK/NG Signal and Beeping Control ♦ Programming Manual FuzzyScan Fixed Mount Scan PROGRAM Parameter Selection F_DEFAULT Family Code Selection P.
Programming Manual FuzzyScan Fixed Mount Scan The OK/NG Signal Active State can control the logic level in digit circuits design, you can adjust the active-high or active-low state for OK and NG signal outputs. The OK and NG signals are NPN outputs. The OK/NG Signal Output Control can control the OK/NG signal outputs and OK/NG indications of the scanner. If you disable OK or NG signal output, the scanner OK or NG indication will be disabled.
Condensed DataWizard ♦ Preamble, Postamble, Data Length & Symbol ID Trans. ♦ PROGRAM F_DEFAULT Family Code Selection P.C Preamble SS MS Parameter Selection None 1-15 characters Option Code FIN [00-7F], [FIN] Maximum 15-character input; scan “FIN” to terminate this selection. Postamble SS MS None 1-15 characters FIN [00-7F], [FIN] Data Length Transmission Programming Manual FuzzyScan Fixed Mount Scan Maximum 15-character input; scan “FIN” to terminate this selection.
Condensed DataWizard ♦ Data Formatter Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Formatter Control SS MS MS 1st Insertion SS DS Parameter Selection Option Code 2nd Option Code Disable Select one bar code symbology Select all bar code symbologies FIN (2 digits) 00 automatic termination automatic termination Disable Enable FIN (2 digits) [1-3 characters], [FIN] 2nd Insertion Programming Manual FuzzyScan Fixed Mount Scan 2-digits identified position; max.
Condensed DataWizard ♦ Data Verifier Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Verifier Control SS MS MS SS DS Identified Data Length Parameter Selection Option Code 2nd Option Code Disable Select one bar code symbology Select all bar code symbologies FIN (2 digits) 00 automatic termination automatic termination Disable Enable FIN (2 digits) 1st Identified Character Programming Manual FuzzyScan Fixed Mount Scan Determine the identified data length for verification.
Condensed DataWizard ♦ Data Replacer Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.
Condensed DataWizard ♦ Data Organizer Setting ♦ PROGRAM Family Code Selection P.
Select a Bar Code Symbology 2D Bar Code Symbology You can select one or all types of bar code symbologies to use Condensed DataWizard for advanced transmission arrangement. If you scan “00” to select all types, the FuzzyScan will arrange all incoming data to meet your pre-defined format. If you want to select only one type bar code, please select one of the option code listed below.
Programming Procedure [Data Verifier] Scan “Program” to enter the programming mode. Application Example Scan “Verifier Control” and set bar code symbology to “48” (Interleaved 2 of 5). If your bar code label is a 16-digit Interleaved 2 of 5 which includes the information of 6-digit date code, 6-digit serial number and 4-digit unit price, you want the FuzzyScan do the following for you without software modification: Scan “Identified Data Length” and set the length to “16”.
[Data Replacer] Scan “Replacer Control” and set bar code symbology to “48”. Scan “1st Replacement” and set the identified position to “00”, then replaced character to “41” (Hex Code of A). [Data Organizer] Scan “Organizer Control” and set bar code symbology to “48”. Scan “2nd Organization” and set the identified position to “17”, then set the data transmission to “1” (backward).
Symbology ID Table Each AIM Code Identifier contains the three-character string ]cm where: ] = Flag Character; c = Code Character; m = Modifier Character 1D Symbology ID Table Cino ID Code Family Primary Format Hex Char. Value 2 UPC-A with 2 supple. 32 UPC-A with 5 supple. 42 UPC-E 3 UPC-E with 2 supple. 33 UPC-E with 5 supple. 43 Cino ID Code Modified Char. Char. A E E Code Family Code 128 Codabar Code 128 01 B C Char. Code Modified Char. Char.
2D Symbology ID Table Cino ID Code Family Primary Format Hex Value QR Code Micro QR Code Programming Manual Cino ID Modified Char. Char. b Q m c d m Japanese Post QR Code Micro QR Code A0 Code Family Code Char. Primary Format Hex AIM ID Char. Value British Post British Post Intelligent Mail barcode Intelligent Mail barcode Code Modified Char. Char.
Programming Manual FuzzyScan Fixed Mount Scan Keyboard Function Code Table No. ANSI ASCII Key Function Ctrl Output No.
ASCII Input Shortcut HEX/ASCII Reference Table To configure the user definable parameters of FuzzyScan via programming menu, FuzzyScan will ask you to scan your desired ASCII value in HEX form. You have to refer to the “HEX/ASCII Table” for details. H Example: Programming Manual If you want the scanned data output leading with a Dollar Sign, you have to set the “Preamble” to “$”. The configuration procedure is listed below for reference.
Host Interface Quick Set RS232 Serial USB Com Port Emulation USB HID Standard Mode Programming Manual FuzzyScan Fixed Mount Scan USB HID Turbo Mode Operation Mode Quick Set FM480 Trigger Mode Force Mode (Continued power on) Alternative Mode (Periodic power off) Presentation Mode (Auto sensing) Level Mode (Auto power off) 81
Operation Mode Quick Set FA470 Trigger Mode Force Mode (Continued power on) Alternative Mode (Periodic power off) Programming Manual FuzzyScan Fixed Mount Scan Presentation Mode (Auto sensing) Level Mode (Auto power off) 82
Option Codes 0 A 5 F 1 B 6 C 7 Programming Manual FuzzyScan Fixed Mount Scan 2 3 D 8 4 E 9 FIN (Finish) Abort 83 END (Exit)
System Commands PROGRAM (Enter Programming Mode) System Information List (SYSLIST) Save User Default PowerTool Host Link User Default Programming Manual FuzzyScan Fixed Mount Scan FIN (Finish) Factory Default END (Exit Programming Mode) Master Default Factory Default: After scanning” Factory Default” command, all parameters will be returned to factory default value.
Indications Power Indicator Status Indicator OK/NG Indicator FM480 FA470 Normal Operation Power on Power Steady blue Indicators Status Off Off Power on beep Good read (OK reading) Off Off 1 green blink 1 good read beep No read (NG reading) Off Off 1 red blink 1 no read beep Programming Manual FuzzyScan Fixed Mount Scan Descriptions OK/NG Beeper Intelli Button Reading Rate Information 100% Indicators Status Steady Green OK/NG Steady Green 80 to 99% Steady Red Steady Green Stea
www.cino.com.tw Fixed Mount Scanner Programming Manual CINO GROUP PC WORTH INT’L CO., LTD.
