User guide

FuzzyScan Fixed Mount Scan
Programming Manual
Revision History
Rev. No. Released Date Description
Rev. A May 26, 2010 First Release
Rev. A1 Jun. 18, 2010
 Page 16 Add “UPC/EAN Security Level”
 Page 38 Add “Immediate” parameter (option 5) to "Time Delay to Low Power Mode"
and change the default value from 5 seconds to immediate.
Rev. A2 Sep. 16, 2010
 Page 19,20 Add “Supplement Scan Voting” in Symbology Reading Control
 Page 21 Add “EAN Supplement Control”
 Page 32 Keyboard Layout – Add “Czech (QWERTY)”, remove “Universal”, and rename
Spain (QWERTY) to Spain (Spanish
QWERTY), Latin America (QWERTY) to
Spain (Latin America, QWERTY)
 Page 36 Cancel” Power On Indicator” and add “Good Read Indicator”.
 Page 41 “Scan Rate Control ”
 Page 45 Add “NG Message Output”
Rev. A3 Nov 11, 2010
 Page 38 Baud Rate – Cancel Baud Rate 300/600 BPS.
Rev. A4 Mar 04, 2011
 Page 38 Baud Rate – Revise 57.6K BPS and 115.2K BPS option code from 6.7. to 8.9.
Rev. A5 Mar 22, 2011
 Page 17 Add ”Code 39 Security Level”
 Page 39 Add “NAK Retry Count”
Add “ACK/NAK Transmission Indication”
Rev. A6 Jul 22, 2011
 Page 13, 23, 28, 56 UCC/EAN-128 was renamed GS1-128.
 Page 39 Rename “ACK/NAK Transmission Indication” to “ACK Indication”.
 Page 39 Add 2 new parameters to “ACK Indication”.(Disable ACK Indication, Enable
ACK Indication)
 Page 39 Rename the 2 parameters of the “ACK Indication”. (Disable Disable ACK
Time-out Indication, Enable Enable ACK Time-out Indication)
 Page 40 Add 6 parameters to “Serial response time -out”. (800 mseconds, 3 second
s,
4 seconds, 8 seconds, 10 seconds, 15 seconds)
 Page 40 Cancel the parameter "User defined value (seconds)” of “
Serial response time
-out”.