FUZZYSCAN FAMILY Quick Start Guide BARCODE SCANNER
Getting Familiar with Your FuzzyScan Thank you for choosing Cino FuzzyScan Bar Code Scanner. All FuzzyScan scanners deliver world-class performance for a broad range of applications to unleash your productivity with ease. FuzzyScan family includes A series area imager, F series linear imager and L series laser imager. The Antimicrobial models are available for A770, L780 and F780 series scanners which are equipped with Disinfectant-ready Housing and Vibrator.
Connecting to Your Host FuzzyScan scanners support USB, PS/2(DOS/V) Keyboard Wedge and RS-232 Serial interfaces. Please choose your desired interface cable, then plug it into the interface port of scanner and connect it to the desired port of your host. If you would like to remove the cable, please straighten one end of a paper clip then insert it into the cable release hole to pull out the cable.
Using SmartStand SmartStand is specifically designed for hand-free applications to maximize user’s comfort and productivity. You can adjust the scanner holder to desired position for optimized scanning. Thanks to the Auto-sense design, the scanner is capable of switching between presentation scanning and hand-held scanning automatically while working with SmartStand. But please note that this function is not available for F560 series scanners.
Operation Modes area imager FuzzyScan family A series array imager supports various operation modes, including trigger, presentation, alternative, level, force, toggle, diagnostic, low power and multiple read modes. The details of each operation mode are listed below for reference. Trigger Mode When trigger mode is selected, the scanner goes into standby state after scanning the bar code. You must press the trigger switch to turn on the light source of the scanner before scanning the bar code.
Force Mode When force mode is selected, the light source of the scanner is forced on for continued operation without having to press the trigger switch. This mode is convenient for high speed bar code reading. Toggle Mode When toggle mode is selected, you must press the trigger switch to turn on the light source of the scanner to start scanning operation. The scanner keeps the light source on until you press the trigger switch again.
Operation Modes linear & laser imager Both F series linear imager and L series laser imager of FuzzyScan family support various operation modes, including trigger, presentation, alternative, level, flash, force, toggle, diagnostic and low power modes. But please note that the laser aiming line of L series is not performed under force, flash, toggle or diagnostic mode to ensure the longer working life of laser imager.
Flash Mode When flash mode is selected, the scanner flashes the light source without having to press the trigger switch. If the scanner detects an image which is similar to a bar code, it forces on the light source automatically and scans the bar code. Force Mode When force mode is selected, the light source of the scanner is forced on for continued operation without having to press the trigger switch. This mode is convenient for high speed bar code reading.
Keyboard Interface Quick Set - Record Suffix - None RETURN ◆ TAB SPACE ENTER - Keyboard Layout - USA ◆ France Germany United Kingdom-UK Canadian French Spain (Spanish) Spain (Latin America) Nertherlands Japan Sweden/Finland 8
Serial Interface Quick Set - Record Suffix - None TAB LF CR ◆ SPACE CRLF - Baud Rate – 115.2K BPS 4800 BPS 19.2K BPS 57.6K BPS 2400 BPS 9600 BPS ◆ 38.
System Commands System Information Master Default PowerTool Host Link User Default Factory Default Save User Default Host Interface Quick Set RS232 Serial Keyboard Replacement PS/2 (DOS/V) KBW Standard Mode PS/2 (DOS/V) KBW Turbo Mode USB HID Standard Mode ◆ USB HID Turbo Mode USB Com Port Emulation 10
System Commands PROGRAM (Enter Programming Mode) END (Exit Programming Mode) Option Codes 0 A 6 1 B 7 2 C 8 3 D 9 4 E 5 F FIN (Finish) 11
Keyboard Interface Control Command Keyboard Layout Record Suffix Parameter Selection Option Code USA ◆ France Germany United Kingdom-UK Canadian French Spain Sweden/Finland Portugal Norway Latin America Italy Netherlands Denmark Belgium Switzerland-Germany Iceland Japan Czech 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 None RETURN ◆ TAB SPACE ENTER User define character 0 1 2 3 4 5 Preamble None ◆ 1-15 characters FIN [00-7F], [FIN] Postamble None ◆ 1-15 characters FIN [00-7F], [F
Serial Interface Control Command Parameter Selection STX/ETX Control Option Code Disable STX/ETX transmission ◆ Enable STX/ETX transmission Record Suffix None CR ◆ LF CRLF 0 1 TAB SPACE User define character 0 1 2 3 4 5 6 Preamble None ◆ 1-15 characters FIN [00-7F], [FIN] Postamble None ◆ 1-15 characters FIN [00-7F], [FIN] Handshaking Protocol None ◆ RTS/CTS ACK/ NAK Xon/Xoff 0 1 2 3 Intermessage Delay None ◆ 1-99 (x5) msec. FIN (2 digits) Intercharacter Delay None ◆ 1-99 (x5) msec.
Keyboard Function Code Table No. ANSI ASCII No.
www.cino.com.tw FuzzyScan Barcode Scanner Quick Start Guide International Edition, Rev. C1 P/N: YMAUB00010040R0 Disclaimer Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication.