BARCODE IMAGER Programming Manual International Edition, Rev.
Revision History Rev. No. Released Date Rev.B Beta Apr. 16, 2009 Description First Release Programming Manual FuzzyScan Page 22 Page 25 Page 46 Code 128/EAN-128 Setting – Modify ISBT Concatenation Off option code to “4” and ISBT Concatenation On option code to “5”. GS1 Databar Setting – All GS1 databar default values are changed to Enable. Add “Symbology ID Table”. June 22, 2009 Page 34 Page 37 Add “Presentation Scanning Mode”. Add “Time Delay to Low Power Mode”. Rev.B2 Aug.
Revision History Rev. No. Released Date Rev. B6 May 27, 2010 Page 33 Baud Rate – Add 57.6K BPS and 115.2K BPS. Jun 25 , 2010 Page 17 Page 38 Add “UPC/EAN Security Level”. Add “Immediate” parameter (option 5) to "Time Delay to Low Power Mode" and change the default value from 5 seconds to immediate. Page 15,16 Page 17 Page 28 Page 37 Page 38 Add “ Supplement Scan Voting”. Add “EAN Supplement Control”.
© Copyright Cino Group © Copyright PC Worth Int’l Co., Ltd Cino makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of merchantability and fitness for any particular purpose. Cino shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains proprietary information that is protected by copyright.
Programming Manual FuzzyScan LED Eye Safety IEC62471 Exempt group Laser Eye Safety IEC60825-1 Class 1
Table of Contents Getting Started Getting Familiar with Your FuzzyScan 1 Connecting to Your Host 1 Using Accessories 2 Configure Your FuzzyScan Programming Manual FuzzyScan Bar Code Programming Manual 3 Programming Procedures 4 Host Interface Selection 8 Symbology Reading Control 9 Keyboard Interface Control 23 Serial Interface Control 32 Wand/Laser Emulation Control 35 Operation Control 36 Condensed DataWizard 41 Appendix Symbology ID Table 48 Keyboard Function Code Table 49
Getting Started Getting Familiar with Your FuzzyScan Connecting to Your Host Thank you for choosing Cino FuzzyScan Imager. All FuzzyScan imagers deliver world-class performance for a broad range of applications to unleash your productivity. This document provides an easy reference for installation and operation purposes. A complete documentation is provided by the FuzzyScan Programming Manual available at www.cino.com.tw.
Getting Started Using Accessories You can enhance productivity of your workforce by using various accessories to fulfill a wide variety of application demand. Universal Holder A stylish Universal Holder is designed for storing your imager when not in use. It serves to protect the imager from lens-scratched or falling. Moreover, its artistic-design enhances the entire value of the imager.
Configure Your FuzzyScan Bar Code Programming Menu The FuzzyScan bar code commands are specially designed Proprietary bar code labels which allow you to set the FuzzyScan internal programming parameters. There are System Command, Family Code and Option Code for programming purpose.
Configure Your FuzzyScan Programming Procedures Programming Manual FuzzyScan As you scan the bar code command to select the desired parameters, information about the final selected parameters represented by the bar code commands are stored in the FuzzyScan’s internal Flash Memory ASIC or non-volatile memory. If you turn off the unit, the Flash Memory ASIC or non-volatile memory retains all programming options.
Configure Your FuzzyScan Program & End System List, Group & Master Default Scan “PROGRAM” Scan “SYSLIST” FuzzyScan will enter programming mode, and inhibit all non-programming functions. revision number to host via selected host interface, FuzzyScan will list the product information and Programming Manual FuzzyScan then issue the completion beeping.
Configure Your FuzzyScan Single scan selection Scan “PROGRAM” Scan One of Family Codes Multiple scans selection Scan “PROGRAM” Enter programming mode. Select one of desired Select one of desired Scan programming families. One of Family Codes programming families. 1. Select one or several Select one option code of Scan One of Option Codes Enter programming mode. Scan One or Several Option Codes desired parameter. option codes to select desired parameters. 2.
Configure Your FuzzyScan Cycling scan selection Dual level level selection Scan “PROGRAM” Scan One of Family Codes Scan “PROGRAM” Enter programming mode. Select one of desired Scan One of Family Codes programming families. Cycling select one or Scan One of Option Codes desired parameters as Programming Manual FuzzyScan (2nd) Scan One or Several Option Codes Scan “FIN” Finish cycling selection. of desired parameters. 1. Select one or several parameters. 2.
Configure Your FuzzyScan Host Interface Selection Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ User Defined Symbol ID ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ Symbology ID Transmission ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ Readable Bar Code Setting ♦ PROGRAM Family Code Selection P.C Readable Symbology Setting SS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS Programming Manual Remember to scan “FIN” to terminate FuzzyScan F_DEFAULT this selection. But if you select the “ Auto ”, FuzzyScan will terminate this selection automatically.
Configure Your FuzzyScan Symbology Reading Control ♦ Code 39/Code 32 Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ Code 39 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Code 39 Security Level SS SS SS SS Parameter Selection Level 0 Level 1 Level 2 Level 3 Option Code 0 1 2 3 Programming Manual FuzzyScan Code 39 Security Level The scanner offers four levels of decode security for Code39 bar codes: Level 0: If you are experiencing misread of poorly-printed or serious out-of-spec. bar codes in level 1, please select level 0.
Configure Your FuzzyScan Symbology Reading Control ♦ Codabar/NW-7 Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ Codabar/NW-7 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Codabar Max. Length SS MS Parameter Selection Default (98) 98-Minimum FIN (2 digits) Programming Manual Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically.
Configure Your FuzzyScan Symbology Reading Control ♦ UPC-A & UPC-E Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ UPC-A & UPC-E Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ EAN Setting, EAN Supplement Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ EAN Security Level Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ UCC Coupon Extended Code Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C UCC Coupon Extended Code SS SS Parameter Selection Disable UCC Coupon Extended Code Enable UCC Coupon Extended Code Option Code 0 1 Programming Manual FuzzyScan UCC Coupon Extended Code When UCC coupon extended code function is enabled, scanner decodes UPC-A barcodes starting with digit “5”, EAN-13 barcodes starting with digit “99” and GS1-128 Coupon Codes.
Configure Your FuzzyScan Symbology Reading Control ♦ IATA & Interleaved 2 of 5 Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ Code 25 Family Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Symbology Reading Control ♦ Code 11 & Code 93 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Code 11 Setting SS SS SS SS SS SS SS Disable Code 11 Enable Code 11 Disable check digit verification Select 1-check digit verification Select 2-check digit verification Disable check digit transmission Enable check digit transmission Code 11 Min.
Configure Your FuzzyScan Symbology Reading Control ♦ MSI/Plessey Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection MSI/Plessey Setting SS SS SS SS SS SS SS Disable MSI/Plessy Enable MSI/Plessy Select MOD 10 check digit Select MOD 10-10 check digit Select MOD 11-10 check digit Disable check digit transmission Enable check digit transmission MSI/Plessey Min.
Configure Your FuzzyScan Symbology Reading Control ♦ Code 128 & UCC/EAN 128 Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Code 128/EAN-128 Setting SS SS SS SS SS SS Disable Code 128 and GS1-128 Enable Code 128 and GS1-128 Disable function code conversion Enable function code conversion ISBT Concatenation Off ISBT Concatenation On Code 128/EAN-128 Min.
Configure Your FuzzyScan Symbology Reading Control ♦ UK/Plessey Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection UK/Plessey Setting SS SS SS SS SS SS SS SS Disable UK/Plessey Enable UK/Plessey Select UK/Plessey Standard Format Select UK/Plessey CLSI Format Disable Convert X to A-F Enable Convert X to A-F Disable check digit transmission Enable check digit transmission UK/Plessey Min.
Configure Your FuzzyScan Symbology Reading Control ♦ Telepen Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Telepen Setting SS SS SS SS SS SS Disable Telepen Enable Telepen Select Telepen Numeric mode Select Telepen Full ASCII mode Disable check digit transmission Enable check digit transmission Telepen Min.
Configure Your FuzzyScan Symbology Reading Control ♦ GS1 DataBar Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection GS1 DataBar Setting SS SS SS SS SS SS Disable GS1 DataBar (RSS-14) Enable GS1 DataBar (RSS-14) Disable GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Expanded Enable GS1 DataBar Expanded GS1 DataBar Min. Length SS MS Default (04) 01-Maximum Option Code 0 1 2 3 4 5 FIN (2 digits) Only available for Expanded GS1 Databar.
Configure Your FuzzyScan Symbology Reading Control ♦ Linear-stacked & Korea Post Code Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Keyboard Interface Control ♦ Keyboard Layout (Language) Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Keyboard Interface Control ♦ Record Suffix, Preamble, Postamble & Caps Lock ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Record Suffix SS SS SS SS SS SS None RETURN TAB SPACE ENTER (Numeric Key Pad) User defined character (1 character) Preamble SS MS None 1-15 characters Option Code 0 1 2 3 4 5, (00-7F) FIN [00-7F], [FIN] Maximum 15-character input; scan “FIN” to terminate this selection.
Configure Your FuzzyScan Keyboard Interface Control ♦ Delay Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Intermessage Delay SS MS Parameter Selection None 1-99 (x5) msec. Option Code FIN (2 digits) Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Intercharacter Delay SS MS None 1-99 (x5) msec.
Configure Your FuzzyScan Keyboard Interface Control ♦ Emulation Setting & Upper/Lower Case Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Function Key Emulation SS SS Parameter Selection Enable ASCII 00-31 code as keyboard function code output Ctrl-Output Option Code 0 1 Programming Manual FuzzyScan Refer to Appendix – Keyboard Function Code Table for details.
Configure Your FuzzyScan Serial Interface Control ♦ Record Suffix, Preamble ,Postamble Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C STX/ETX Control SS SS Parameter Selection Option Code Disable STX/ETX transmission Enable STX/ETX transmission 0 1 Programming Manual FuzzyScan STX/ETX are two characters used to indicate the starting and ending of the total data frame transmitted via serial interface.
Configure Your FuzzyScan Serial Interface Control ♦ Delay Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Intermessage Delay SS MS Parameter Selection None 1-99 (x5) msec. Option Code FIN (2 digits) Scan 2 digits from the option code chart in Appendix, then FuzzyScan will terminate this selection automatically. Intercharacter Delay SS MS None 1-99 (x5) msec.
Configure Your FuzzyScan Serial Interface Control ♦ Protocol, ACK/NAK Setting ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Serial Interface Control ♦Time Out Setting, Baud Rate, Data Frame ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Option Code Serial Response Time-out SS SS SS SS SS SS None 200 mseconds 500 mseconds 800 mseconds 1 second 2 seconds 3 seconds 4 seconds 5 seconds 8 seconds 10 seconds 15 seconds 0 1 2 3 4 5 6 7 8 9 A B Baud Rate (BPS) SS SS SS SS 38.4K BPS 19.2K BPS 9600 BPS 4800 BPS 2400 BPS 1200 BPS 57.6K BPS 115.
Configure Your FuzzyScan Wand/Laser Emulation Control ♦ Code 39/Code 128 Emulation ♦ PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Operation Control ♦ Operation Mode Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Operation Mode SS SS SS SS SS Low Power mode Trigger mode Presentation mode Alternative mode Flash mode Presentation Control SS SS SS Presentation mode Flash mode Force mode Force mode Toggle mode Diagnostic mode Level mode L680/L780 laser imagers don’t support: Flash/ Force/ Toggle/ Diagnostic mode.
Configure Your FuzzyScan Operation Control ♦ Buzzer, Indicator, Vibrator, Inverse Reading ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Operation Control ♦ Dollar Sign, Redundancy, Scan Rate Control♦ ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.C Parameter Selection Dollar Sign Control SS SS SS SS SS Dollar sign output as “ $ “ Dollar sign output as “ “ Dollar sign output as “ € “ Dollar sign output as “ £ “ Dollar sign output as “ ¢ “ 0 1 2 3 4 Redundancy SS SS SS SS SS SS None Level 1 Level 2 Level 3 Level 4 Level 5 To prevent potential miss reading.
Configure Your FuzzyScan Operation Control ♦ Flash Duty Cycle, Delay Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Flash Duty Cycle SS SS SS SS Parameter Selection 1/2 duty cycle 2/3 duty cycle 3/4 duty cycle 4/5 duty cycle Option Code 0 1 2 3 Programming Manual FuzzyScan L680/L780 laser imagers don’t support this function.
Configure Your FuzzyScan Operation Control ♦ Time-out Setting, Good Read Duration ♦ Programming Manual FuzzyScan PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Operation Control ♦ Presentation Scanning Setting , Trigger Control♦ ♦ PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Operation Control ♦ Laser Aiming Control♦ ♦ PROGRAM F_DEFAULT Family Code Selection P.C Laser Aiming Control SS SS Parameter Selection Disable Enable 0 ◆ 1 Only available for L series laser imaging scanner. Programming Manual You can disable or enable laser aiming line when you scan PDF barcode.
Configure Your FuzzyScan Condensed DataWizard ♦ Preamble, Postamble, Data Length & Symbol ID Trans. ♦ PROGRAM F_DEFAULT Family Code Selection P.C Preamble SS MS Parameter Selection None 1-15 characters Option Code FIN [00-7F], [FIN] Maximum 15-character input; scan “FIN” to terminate this selection. Postamble SS MS None 1-15 characters FIN [00-7F], [FIN] Maximum 15-character input; scan “FIN” to terminate this selection.
Configure Your FuzzyScan Condensed DataWizard ♦ Data Formatter Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Formatter Control SS MS MS 1st Insertion SS DS Parameter Selection Option Code 2nd Option Code Disable Select one bar code symbology Select all bar code symbologies FIN (2 digits) 00 automatic termination automatic termination Disable Enable FIN (2 digits) [1-3 characters], [FIN] 2-digits identified position; max.
Configure Your FuzzyScan Condensed DataWizard ♦ Data Verifier Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.C Verifier Control SS MS MS SS DS Identified Data Length Parameter Selection Option Code 2nd Option Code Disable Select one bar code symbology Select all bar code symbologies FIN (2 digits) 00 automatic termination automatic termination Disable Enable FIN (2 digits) Determine the identified data length for verification.
Configure Your FuzzyScan Condensed DataWizard ♦ Data Replacer Setting ♦ PROGRAM F_DEFAULT Family Code Selection P.
Configure Your FuzzyScan Condensed DataWizard ♦ Data Organizer Setting ♦ PROGRAM Family Code Selection P.
Configure Your FuzzyScan [Data Verifier, Data Replacer, Data Organizer] Select a Bar Code Symbology If there is a 11-character data string, please refer to the following to calculate the actual position for identification. Programming Manual FuzzyScan You can select one or all types of bar code symbologies to use Condensed DataWizard for advanced transmission arrangement. If you scan “00” to select all types, the FuzzyScan will arrange all incoming data to meet your pre-defined format.
Configure Your FuzzyScan Programming Procedure [Data Verifier] [Data Replacer] Scan “Program” to enter the programming mode. Scan “Replacer Control” and set bar code symbology to “48”. Scan “Verifier Control” and set bar code symbology to “48” (Interleaved 2 of 5). Scan “1st Replacement” and set the identified position to “00”, then replaced character to “41” (Hex Code of A). Programming Manual FuzzyScan Scan “Identified Data Length” and set the length to “16”.
Appendix Symbology ID Table Each AIM Code Identifier contains the three-character string ]cm where: ] = Flag Character c = Code Character m = Modifier Character Cino ID Code Family Primary Format AIM ID Code Code Modified Character Character Character UPC-A UPC-A with 2 supple. A UPC-A with 5 supple. UPC E UPC-E UPC-E with 2 supple. E Programming Manual UPC-E with 5 supple. FuzzyScan Cino ID Code Family m EAN/JAN-8 1 EAN/JAN-8 with 2 supple. 2 EAN/JAN-8 with 5 supple.
Appendix Programming Manual FuzzyScan Keyboard Function Code Table No. ANSI ASCII 00 NUL 00H 01 SOH 02 Key Function No.
Appendix ASCII Input Shortcut To configure the user definable parameters of FuzzyScan via programming menu, FuzzyScan will ask you to scan your desired ASCII value in HEX form. You have to refer to the “HEX/ASCII Table” for details. HEX/ASCII Reference Table H 0 1 2 3 4 5 6 7 0 NUL DLE SPACE 0 @ P ` p Example: 1 SOH DC1 ! 1 A Q a q If you want the scanned data output leading with a Dollar Sign, you have to set the “Preamble” to “$”.
Appendix Host Interface Quick Set RS232 Serial PS/2 (DOS/V) KBW Standard Mode USB HID Standard Mode Keyboard Replacement PS/2 (DOS/V) KBW Turbo Mode Programming Manual FuzzyScan USB HID Turbo Mode USB Com Port Emulation 56
Appendix Operation Mode Quick Set Low Power (Low power trigger) Force (Continued power on) Alternative (Periodic power off) Trigger (External triggering) Toggle (Repeat reading) Programming Manual FuzzyScan Flash (Pulse driven reading) Presentation (Auto sensing) Diagnostic (Test reading) Level (Auto power off) 57
Appendix Option Codes 0 8 4 C 1 9 5 D Programming Manual FuzzyScan 2 A 6 E 3 B 7 F FIN (Finish) END (Exit) 58
Appendix System Commands PROGRAM (Enter Programming Mode) System Information List (SYSLIST) Save User Default FIN (Finish) PowerTool Host Link Programming Manual FuzzyScan User Default END (Exit Programming Mode) Factory Default Master Default Factory Default: After scanning” Factory Default” command, all parameters will be returned to factory default value.
www.cino.com.tw FuzzyScan Family Programming Manual CINO GROUP PC WORTH INT’L CO., LTD.
