Specifications

Command Descriptions
Programming Reference
VERSAJET MP3200
[Notes]
In standard mode, this command is effective only when there is no data in the print buffer.
This command has no effect in the print modes (emphasized, double-strike, underline,
character size, or white/black reverse printing) for raster bit image.
If the printing area width set by GS L and GS W is less than the minimum width, the
printing area is extended to the minimum width only on the line in question. The
minimum width means 1 dot in normal (n=0, 48) and double-height (n=2, 50), 2 dots in
double-width (n=1, 49) and quadruple (n=3, 51) modes.
Data outside the printing area is read in and discarded on a dot-by-dot basis.
The position at which subsequent characters are to be printed for raster bit image is
specified by HT(Horizontal Tab), ESC $(Set absolute print position), ESC \(Set relative
print position), and GS L(Set left margin). If the position at which subsequent characters
are to be printed is not a multiple of 8, print speed may decline.
The ESC a(Select justification) setting is also effective on raster bit images.
When this command is received during macro definition, the printer ends macro definition,
and begins performing this command. The definition of this command should be cleared.
81 Preliminary Rev. 02