Specifications

Cinterion
®
ALAS5V Hardware Interface Description
5.2 Mounting ALAS5V onto the Application Platform
107

ALAS5V_HID_v00.030a 2019-03-20
Confidential / Preliminary
Page 103 of 124
5.2.4 Durability and Mechanical Handling
5.2.4.1 Storage Conditions
ALAS5V modules, as delivered in tape and reel carriers, must be stored in sealed, moisture bar-
rier anti-static bags. The conditions stated below are only valid for modules in their original
packed state in weather protected, non-temperature-controlled storage locations. Normal stor-
age time under these conditions is 12 months maximum.
5.2.4.2 Processing Life
ALAS5V must be soldered to an application within 72 hours after opening the moisture barrier
bag (MBB) it was stored in.
As specified in the IPC/JEDEC J-STD-033 Standard, the manufacturing site processing the
modules should have ambient temperatures below 30°C and a relative humidity below 60%.
Table 29: Storage conditions
Type Condition Unit Reference
Air temperature: Low
High
-25
+40
°C IPC/JEDEC J-STD-033A
Humidity relative: Low
High
10
90 at 40°C
% IPC/JEDEC J-STD-033A
Air pressure: Low
High
70
106
kPa IEC TR 60271-3-1: 1K4
IEC TR 60271-3-1: 1K4
Movement of surrounding air 1.0 m/s IEC TR 60271-3-1: 1K4
Water: rain, dripping, icing
and frosting
Not allowed --- ---
Radiation: Solar
Heat
1120
600
W/m
2
ETS 300 019-2-1: T1.2, IEC 60068-2-2 Bb
ETS 300 019-2-1: T1.2, IEC 60068-2-2 Bb
Chemically active substances Not recom-
mended
IEC TR 60271-3-1: 1C1L
Mechanically active sub-
stances
Not recom-
mended
IEC TR 60271-3-1: 1S1
Vibration sinusoidal:
Displacement
Acceleration
Frequency range
1.5
5
2-9 9-200
mm
m/s
2
Hz
IEC TR 60271-3-1: 1M2
Shocks:
Shock spectrum
Duration
Acceleration
Semi-sinusoidal
1
50
ms
m/s
2
IEC 60068-2-27 Ea