Specifications

Cinterion
®
ALAS5V Hardware Interface Description
2.1 Application Interface
67
 ALAS5V_HID_v00.030a 2019-03-20
Confidential / Preliminary
Page 29 of 124
2.1.2.1 Absolute Maximum Ratings
The absolute maximum ratings stated in Table 5 are stress ratings under any conditions.
Stresses beyond any of these limits will cause permanent damage to ALAS5V.
Table 5: Absolute maximum ratings (TBD.)
Parameter Min Max Unit
Supply voltage BATT+ -0.3 +5.5 V
Voltage at all digital lines in Power Down mode (except VEXT) -0.3 +0.5 V
Voltage at VEXT in Power Down mode -0.3 +0.3 V
Voltage at digital lines in normal operation -0.3 +2.3 V
Voltage at UICC interface, CCVCC 1.8V in normal operation -0.3 +2.3 V
Voltage at UICC interface, CCVCC 3.0V in normal operation -0.3 +3.4 V
Voltage at ADC lines if the module is powered by BATT+ -0.5 V
BATT+
+0.5V V
Voltage at ADC lines if the module is not powered -0.5 +0.5 V
VEXT maximum current shorted to GND -600 mA
VUSB_IN -0.3 5.75 V
USB 3.0 data lines -0.3 +1.4 V
USB 2.0 data lines -0.3 +3.6 V
PCIe data and clock lines -0.3 +1.4 V
PCIe control lines -0.3 2.1 V
Voltage at PWR_IND line -0.5 5.5 V
PWR_IND input current if PWR_IND= low 2 mA
Voltage at following signals:
IGT, EMERG_OFF
-0.3 2.1 V