Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.1.1 Pad Assignment
- 2.1.2 Signal Properties
- 2.1.3 USB Interface
- 2.1.4 Serial Interface ASC0
- 2.1.5 Serial Interface ASC1
- 2.1.6 Inter-Integrated Circuit Interface
- 2.1.7 UICC/SIM/USIM Interface
- 2.1.8 Enhanced ESD Protection for SIM Interfaces
- 2.1.9 Digital Audio Interface
- 2.1.10 Analog-to-Digital Converter (ADC)
- 2.1.11 RTC Backup
- 2.1.12 GPIO Interface
- 2.1.13 Control Signals
- 2.1.14 JTAG Interface
- 2.1.15 eMMC Interface
- 2.2 GSM/UMTS/LTE Antenna Interface
- 2.3 GNSS Antenna Interface
- 2.4 Sample Application
- 2.1 Application Interface
- 3 GNSS Interface
- 4 Operating Characteristics
- 5 Mechanical Dimensions and Mounting
- 6 Regulatory and Type Approval Information
- 7 Document Information
- 8 Appendix
Cinterion
®
ALAS5V Hardware Interface Description
2.2 GSM/UMTS/LTE Antenna Interface
67
ALAS5V_HID_v00.030a 2019-03-20
Confidential / Preliminary
Page 50 of 124
2.2.3 RF Line Routing Design
2.2.3.1 Line Arrangement Instructions
Several dedicated tools are available to calculate line arrangements for specific applications
and PCB materials - for example from http://www.polarinstruments.com/ (commercial software)
or from http://web.awrcorp.com/Usa/Products/Optional-Products/TX-Line/ (free software).
Embedded Stripline
This below figure shows line arrangement examples for embedded stripline.
Figure 17: Embedded Stripline line arrangement