Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
6.1 Revision History
140
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-02
Public/ Released
Page 131 of 144
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100b
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description"v01.100c
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100a
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100b
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100a
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.003
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.100
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.001
Chapter What is new
2.1.2 Detailed description for EMERG_RST signal in Table 2.
2.4 Replaced “PWR_IND” with “Power indication” in Figure 31.
Chapter What is new
3.4.1 Updated power supply ratings.
7.1 Revised ordering information for the EXSx2 MFF-XS MIM/eUICC evaluation modules.
Chapter What is new
Throughout
document
Added details about the embedded processing option.
2.1.4 Revised Figure 8.
3.2.2.2 Revised Figure 36.
3.4.1 Added voltage ripple for EXS62-W in Table 19.
4.1 Revised Figure 51 and Figure 52.
7.1 Added ordering information for the EXSx2 MFF-XS MIM/eUICC product variants.
Chapter What is new
3.4.1 Reinstated power supply ratings.
Chapter What is new
Throughout
document
Added support for seven external GPIOs (GPIO6-7, GPIO20-23, GPIO25).
Removed notes that USB interface is available for tracing purposes only.
Revised supported MIM form factor from MFF2 to MFF-XS.
1.2, 2.2.1 Revised GSM/GPRS/EGPRS Multislot Class (10 --> 12).
2.1.2 Completed signal properties for MIM interface.
2.1.3 Added remark on USB suspend/resume mechanisms and power saving.
2.4 Revised Figure 32 to add USB and GPIO interfaces.
3.3.1.1 Added note for real time response requests during eDRX SLEEP/SUSPEND mode.
3.4.1 Set power supply ratings to TBD.
3.7 Removed USB_DP and USB_DN lines from Table 27.
7.1 Updated ordering information.