Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description
6.1 Revision History
140
t EXS62-W_EXS82-W_HID_v01.200ee 2022-09-02
Public/ Released
Page 132 of 144
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.003
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.000
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.001
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.038
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v01.000
Preceding document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.020a
New document: "Cinterion
®
EXS62-W/EXS82-W Hardware Interface Description" v00.038
Chapter What is new
Throughout
document
Added support for MIM (MFF2 UICC) interface.
1.2 Added support for Cinterion
®
IoT Module services (MODS) as key feature.
2.1.7 New section eUICC Interface.
3.4.1 Revised power supply ratings.
3.6 Added CDM to table showing electrostatic values.
Chapter What is new
-- Updated version number.
Chapter What is new
Throughout
document
Removed LTE Bd14.
Renamed LTE Bd4 (AWS --> AWS-1), LTE Bd66 (1700MHz --> AWS-3).
1.2 Added references from key feature list to appropriate document sections.
2.1.2.1 Added absolute maximum ratings for digital lines in normal operation.
2.1.11.3 Revised fast shutdown description.
2.1.11.2 Adapted power indication circuit shown in Figure 20.
2.2.1 Added further specifications to Table 9.
Revised <ROPR> values in Table 9 (“0”...”4” --> “4”...”8”).
2.3.1 Added note that concurrent GNSS and GSM/LTE operations are not supported.
2.3.3 Revised Table 10 listing GNSS antenna interface characteristics.
3.2.3 Revised section Signal States after Startup including Table 14.
3.4.1 Revised power supply ratings.
5.4 Added antenna gain limits.
Chapter What is new
Throughout
document
Revised extended voltage range for LTE with GSM deactivated: 2.5V - 4.8V.
2.1.2.1 Added maximum ratings for BATT+
RF
line.
2.2.1 Revised typical RF power ratings for LTE Cat M1 and Cat NB1/2 in Table 9.
2.3.3 Added further GNSS antenna interface characteristics.
3.1 Revised Table 11 giving an overview of operating modes.
3.3 Revised complete section to further detail power saving topics.