Specifications

Table Of Contents

Cinterion

EXS82-W Hardware Interface Overview

1 Introduction

 EXS82-W_HIO_v00.038 2019-12-27

Public / Preliminary

Page 6 of 44

1 Introduction

This document

describes the hardware of the Cinterion® EXS82-W module. It helps you

quickly retrieve interface specifications, electrical and mechanical details and information on

the requirements to be considered for integrating further components.

Note: This Hardware Interface Overview is an early draft version and as such subject to

change depending on further implementation and measurements.

1.1 Product Variants

This document applies to the following Gemalto M2M module variants:

•Cinterion

EXS82-W

1.2 Key Features at a Glance

1. The document is effective only if listed in the appropriate Release Notes as part of the technical docu-

mentation delivered with your Gemalto M2M product.

Feature Implementation

General

Frequency bands GSM (EXS82-W only):

850/900/1800/1900

LTE Cat M1:

700 (Bd12, Bd13, Bd14, Bd28, Bd85), 800 (Bd18, Bd19, Bd20, Bd26,

Bd27), 850 (Bd5), 900 (Bd8), 1700 (Bd66), AWS (Bd4), 1800 (Bd3), 1900

(Bd2, Bd25), 2100 (Bd1)

LTE Cat NB1/2:

600 (Bd71), 700 (Bd12, Bd13, Bd28, Bd85), 800 (Bd18, Bd19, Bd20, Bd26),

850 (Bd5), 900 (Bd8), 1700 (Bd66), AWS (Bd4), 1800 (Bd3), 1900 (Bd2,

Bd25), 2100 (Bd1)

GSM class Small MS

Output power (according

to Release 7)

GSM/GPRS (EXS82-W only):

Class 4 (+33dBm ±2dB) for GSM850 and GSM900

Class 1 (+30dBm ±2dB) for GSM1800 and GSM1900

Class E2 (+27dBm ± 3dB) for GSM850 8-PSK and GSM 900 8-PSK

Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK and GSM1900 8-PSK

Output power (according

to 3GPP Release 13)

LTE Cat M1:

Class 5(+20dBm ±2dB) for all supported LTE Cat M1 bands

LTE Cat NB1/2:

Class 5(+20dBm ±2dB) for all supported LTE Cat NB1/2 bands