Specifications

Cinterion
®
EXS82-W Hardware Interface Overview
1.2 Key Features at a Glance
10
 EXS82-W_HIO_v00.038 2019-12-27
Public / Preliminary
Page 8 of 44
Modes Standalone GNSS (GPS, GLONASS, BeiDou, Galileo)
General Automatic power saving modes
Power supply for active antenna
Software
AT commands Hayes 3GPP TS 27.007, TS 27.005, Gemalto M2M
AT commands for RIL compatibility
SIM Application Toolkit SAT Release 99
Firmware update Firmware update from external application over ASC0 and ASC1 interface.
Interfaces
Module interface Surface mount device with solderable connection pads (SMT application
interface). Land grid array (LGA) technology ensures high solder joint reli-
ability and allows the use of an optional module mounting socket.
For more information on how to integrate SMT modules see also [4]. This
application note comprises chapters on mounting and application layout
issues as well as on additional SMT application development equipment.
USB USB 2.0 High Speed (480Mbit/s) device interface, Full Speed (12Mbit/s)
compliant
The USB interface is used for tracing purposes only.
2 serial interfaces ASC0:
• 8-wire modem interface with status and control lines, unbalanced, asyn-
chronous
• Adjustable baud rates: 300bps to 921,600bps
• Supports RTS0/CTS0 hardware flow control (as configuration option).
ASC1:
• 4-wire, unbalanced asynchronous modem interface
• Adjustable baud rates: 300bps to 921,600bps
• Supports RTS1/CTS1 hardware flow control (as configuration option).
UICC interface Supported SIM/USIM cards: 1.8V
Status Supports status indication LED
Fast shutdown Supports fast shutdown interrupt signal
SIM switch Supports signal to switch between two externally connected SIMs.
Antenna interface pads 50Ω. GSM/LTE Main antenna, GNSS antenna
Power on/off, Reset
Power on/off Switch-on by hardware signal ON
Switch-off by AT command and hardware signal FST_SHDN
Automatic switch-off in case of critical voltage conditions
Reset Orderly shutdown and reset by AT command
Emergency reset by hardware signal EMERG_RST
Special features
Approval RED, CE, FCC, ISED, UL, EuP, RoHS, and REACH compliant
GCF, PTCRB
Phonebook SIM and phone
Feature Implementation