User's Manual

16/18
7.4 Overcurrent protection
1 This product does not have a built-in fuse for overcurrent protection. To p
revent danger, use an overcurrent protection fuse on the power line.
7.5 Storage precautions
1 Avoid locations that generate a lot of corrosive gas such as salt wind, chl
orine, hydrogen sulfide, sulfur oxide, hydrogen chloride, and subsulfide gas.
2 Condensation will occur in places with rapid temperature and humidity cha
nges. Avoid such an environment and store in a place with little temperat
ure change.
3 Do not place the product on an unstable place such as on a wobbling tab
le or tilted. It may fall and cause malfunction or injury.
4 Do not store in humid or dusty places. It may cause overheating, ignition
or malfunction.
7.6 Carrying method
1 Do not throw or drop. This product may be damaged.
2 Do not get wet with water. Be careful not to get it wet during transportati
on during rainfall or snowfall.
7.7 Other
1 Please note that we are not liable for any malfunctions or abnormalities t
hat may occur as a result of using this product in a manner that deviates
from the contents described in this specification.
2 With regard to the equipment described in this specification, parts may be
changed to alternative parts within the range that does not impair the el
ectrical, mechanical, and environmental resistance characteristics.
3 If the chassis gets too hot to touch with your hands, do not touch the ch
assis directly, stop using it immediately, and contact our sales department
or your local branch / branch / sales office.
4 Never perform internal inspections or repairs by the customer. Inspection
and repair by non-special maintenance personnel may cause a fire or elec
tric shock. For internal inspection and repair, please ask our sales depart
ment or your nearest branch / branch / sales office or agency.
Explanation of symbol mark
Caution This symbol indicates general cautions, warnings, or dangers that are not
specified.
Instruction This symbol tells the user what general actions are not specified.
Instruction to turn
off the power
This symbol indicates that the user should unplug the power plug from t
he outlet.