Specifications

Cinterion
®
PDS5-E/PDS5-US Hardware Interface Overview
5.3 Reference Equipment for Type Approval
27
 PDS5_HIO_v04.000 2018-09-17
Confidential / Preliminary
Page 26 of 35
5.3 Reference Equipment for Type Approval
The Gemalto M2M reference setup submitted to type approve PDS5-E/PDS5-US (including a
special approval adapter for the DSB75) is shown in the following figure
1
:
Figure 7: Reference equipment for Type Approval
1. For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the evaluation module directly to the GSM/UMTS test equipment instead of employing
the SMA antenna connectors on the PDS5-E/PDS5-US-DSB75 adapter as shown in Figure 7. The follo-
wing products are recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)
Antenna
GSM / GPRS / UMTS
Antenna with 1m cable
ASC0
PC
Power
supply
GSM / GPRS / UMTS
Base station
DSB75
Audio test system
Handset
USB
Codec adapter
DAI
Analog
Audio
Approval adapter for
DSB75
SMA
Evaluation module
PDS5
USB
Evaluation module
PDS5
SIM card
Audio