Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
PDS5-E/PDS5-US Hardware Interface Overview
1.1 Key Features at a Glance
9
PDS5_HIO_v04.000 2018-09-17
Confidential / Preliminary
Page 8 of 35
SIM Application Toolkit SAT Release 99
Firmware update Generic update from host application over ASC0 or USB modem.
Interfaces
Module interface Surface mount device with solderable connection pads (SMT application
interface). Land grid array (LGA) technology ensures high solder joint reli-
ability and provides the possibility to use an optional module mounting
socket.
For more information on how to integrate SMT modules see also [3]. This
application note comprises chapters on module mounting and application
layout issues as well as on SMT application development equipment.
USB USB 2.0 High Speed (480Mbit/s) device interface, Full Speed (12Mbit/s)
compliant
1 serial interface ASC0:
• 8-wire modem interface with status and control lines, unbalanced, asyn-
chronous
• Adjustable baud rates: 1,200bps to 921,600bps
• Autobauding: 1,200bps to 230,400bps
• Supports RTS0/CTS0 hardware flow control.
Audio 1 digital interface (PCM)
UICC interface Supported SIM/USIM cards: 3V, 1.8V
GPIO interface 8 GPIOs shared with fast shutdown or host wakeup, pulse counter, and
PWM functionality
I
2
C interface Supports I
2
C serial interface
SPI interface Serial peripheral interface
ADC input Analog-to-digital comverter for general purpose voltage measurements
Antenna interface pads 50
Power on/off, Reset
Power on/off Switch-on by hardware signal IGT
Switch-off by AT command
Switch off by hardware signal GPIO4/FST_SHDN instead of AT command
Automatic switch-off in case of critical temperature and voltage conditions
Reset Orderly shutdown and reset by AT command
Emergency reset by hardware signal EMERG_OFF and IGT
Special features
Real time clock Timer functions via AT commands
Phonebook SIM and phone
TTY/CTM support Integrated CTM modem
Evaluation kit
Evaluation module PDS5-E/PDS5-US module soldered onto a dedicated PCB that can be con-
nected to an adapter in order to be mounted onto the DSB75.
DSB75 DSB75 Development Support Board designed to test and type approve
Gemalto M2M modules and provide a sample configuration for application
engineering. A special adapter is required to connect the PDS5-E/PDS5-
US evaluation module to the DSB75.
Feature Implementation