Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Antenna Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
PLSx3 Hardware Interface Description
5.3 Reference Equipment for Type Approval
117
t
PLSx3_HID_v01.002d 2021-08-24
Public / Released
Page 112 of 129
5.3 Reference Equipment for Type Approval
The Thales reference setup submitted to type approve PLSx3 (including a special approval
adapter for the DSB75) is shown in the following figure
1
:
Figure 49: Reference equipment for Type Approval
1. For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the evaluation module directly to the GSM/UMTS test equipment instead of employing
the SMA antenna connectors on the PLSx3-DSB75 adapter as shown in Figure 49. The following prod-
ucts are recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)
DSB75
AH6-Adapter
SIM Card
SMA
SMA
SMA
USB
PC
Power
Supply
LTE / GPRS / UMTS
Base Station
Diversity
Antenna
USB
ASC0
Main
Antenna
Eval_Board
PLS6x3
Eval_Board
PLS6x3