Specifications

Cinterion
®
PLSx3 Hardware Interface Description
6.2 Related Documents
125
t
PLSx3_HID_v01.002d 2021-08-24
Public / Released
Page 122 of 129
6.2 Related Documents
[1] PLSx3 AT Command Set
[2] PLSx3 Release Note
[3] Universal Serial Bus Specification Revision 2.0, April 27, 2000
[4] Application Note 48: SMT Module Integration
[5] Differences between Selected Cinterion
®
Modules, Hardware Migration Guide
6.3 Terms and Abbreviations
Abbreviation Description
ADC Analog-to-digital converter
AGC Automatic Gain Control
ANSI American National Standards Institute
ARFCN Absolute Radio Frequency Channel Number
ARP Antenna Reference Point
ASC0/ASC1 Asynchronous Controller. Abbreviations used for first and second serial interface of
PLSx3
B Thermistor Constant
BER Bit Error Rate
BIP Bearer Independent Protocol
BTS Base Transceiver Station
CB or CBM Cell Broadcast Message
CE Conformité Européene (European Conformity)
CHAP Challenge Handshake Authentication Protocol
CPU Central Processing Unit
CS Coding Scheme
CSD Circuit Switched Data
CTS Clear to Send
DAC Digital-to-Analog Converter
dBm0 Digital level, 3.14dBm0 corresponds to full scale, see ITU G.711, A-law
DCE Data Communication Equipment (typically modems, e.g. Thales module)
DRX Discontinuous Reception
DSB Development Support Box
DSP Digital Signal Processor
DSR Data Set Ready
DTR Data Terminal Ready
DTX Discontinuous Transmission
EFR Enhanced Full Rate