Specifications

Cinterion
®
PLSx3 Hardware Interface Description
3.4 Power Supply
89
t PLSx3_HID_v01.002d 2021-08-24
Public / Released
Page 83 of 129
I
BATT+
2
(i.e., sum of
BATT+
BB
and
BATT+
RF
)
Average
GSM1900
supply current
5
GPRS Data transfer
GSM1900; PCL=0;
1Tx/4Rx
ROPR=8
(max. reduction)
210 mA
ROPR=4
(no reduction)
208 mA
GPRS Data transfer
GSM1900; PCL=0;
2Tx/3Rx
ROPR=8
(max. reduction)
295 mA
ROPR=4
(no reduction)
358 mA
GPRS Data transfer
GSM1900; PCL=0;
4Tx/1Rx
ROPR=8
(max. reduction)
433 mA
ROPR=4
(no reduction)
643 mA
EDGE Data transfer
GSM1900; PCL=0;
1Tx/4Rx
ROPR=8
(max. reduction)
162 mA
ROPR=4
(no reduction)
163 mA
EDGE Data transfer
GSM1900; PCL=0;
2Tx/3Rx
ROPR=8
(max. reduction)
249 mA
ROPR=4
(no reduction)
272 mA
EDGE Data transfer
GSM1900; PCL=0;
4Tx/1Rx
ROPR=8
(max. reduction)
417 mA
ROPR=4
(no reduction)
476 mA
Peak current
during GSM
transmit burst
5
GPRS Data transfer GSM850; PCL=5; 1Tx/
1Rx @ 50Ω
2.3 A
GPRS Data transfer GSM900; PCL=5; 1Tx/
1Rx @ 50Ω
2.2 A
GPRS Data transfer DCS1800; PCL=0; 1Tx/
1Rx @ 50Ω
1.4 A
GPRS Data transfer PCS1900; PCL=0; 1Tx/
1Rx @ 50Ω
1.4 A
GPRS Data transfer GMS850; PCL=5; 1Tx/
1Rx @ total mismatch
2.7 A
GPRS Data transfer GMS900; PCL=5; 1Tx/
1Rx @ total mismatch
2.8 A
GPRS Data transfer DCS1800; PCL=0; 1Tx/
1Rx @ total mismatch
1.7 A
GPRS Data transfer DCS1900; PCL=0; 1Tx/
1Rx @ total mismatch
1.8 A
1. Note: Current consumption ratings are based on measurements done in a laboratory test environment,
and deviations may occur from the given typical ratings. Under real life conditions however, with e.g., vary-
ing network quality, location changes, or changing supply currents, the deviations from these typical rat-
ings may be even bigger, and will have to be taken into account for actual power supply solutions. For
more details on power supply design see [3].
2. With an impedance of Z
LOAD
=50Ω at the antenna pad. Measured at 25°C and 3.8V.
Table 19: Current Consumption Ratings -GSM
1
Description Conditions Typical rating
(W,EP,LA,J, I)
Unit