Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Antenna Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
PLSx3 Hardware Interface Description
1.2 Key Features at a Glance
16
t PLSx3_HID_v01.003 2021-03-12
Public / Released
Page 10 of 122
3GPP Release 7
UE CAT. 8, 6 for PLS63
HSDPA – DL 7.2Mbps
HSUPA – UL 5.7Mbps
UE CAT. 14, 6 for PLS83
HSPA+ – DL 21Mbps
HSUPA – UL 5.7Mbps
Compressed mode (CM) supported according to 3GPP TS25.212
UMTS features
3GPP Release 4 PS data rate – 384 kbps DL / 384 kbps UL
CS data rate – 64 kbps DL / 64 kbps UL
GSM/GPRS/EGPRS features
Data transfer GPRS:
• Multislot Class 12
• Mobile Station Class B
• Coding Scheme 1 – 4
EGPRS:
• Multislot Class 12
• EDGE E2 power class for 8 PSK
• Downlink coding schemes – CS 1-4, MCS 1-9
• Uplink coding schemes – CS 1-4, MCS 1-9
• SRB loopback and test mode B
• 8-bit, 11-bit RACH
• 1 phase/2 phase access procedures
• Link adaptation and IR
• NACC, extended UL TBF
• Mobile Station Class B
SMS Point-to-point MT and MO
Cell broadcast
Text and PDU mode
Storage: SIM card plus SMS locations in mobile equipment
GNSS Features
Protocol NMEA
Modes
(see Section 2.3)
Standalone GNSS (GPS, GLONASS, Beidou, Galileo)
General Automatic power saving modes.
DC feed bridge and control of power supply for active antenna
Software
AT commands Hayes 3GPP TS 27.007, TS 27.005, Thales
SIM Application Toolkit Default (Network) bearer support for BIP
Firmware update Generic update from host application over USB modem
Feature Implementation