Specifications

Cinterion
®
PLSx3 Hardware Interface Description
5.1 Directives and Standards
111
t
PLSx3_HID_v01.003 2021-03-12
Public / Released
Page 104 of 121
Hazardous Substances,
Chemical reaction
- Under regular conditions, the Cinterion
®
modules
does not contain any chemically reactive sub-
stances, and no chemical energy source, espe-
cially no battery.
Module is compliant with RoHS and REACH.
In very rare cases however - under abnormal con-
ditions 9i.e. wrong supply voltage, burned module)
or in the presence of single electrical component
faults (i.e. shortcut) - health hazardous sub-
stances might be released if the worst comes to
the worst.
Kinetic / mechanical energy
source
MS-1 The Cinterion
®
modules have no sharp edges and
corners, no moving parts, no loosing, exploding or
imploding parts.
The mass is well below 1kg.
Thermal energy source TS-2 Under normal operating conditions, abnormal
operating conditions or single fault conditions the
temperature does not exceed +100°C on the
metal surface (shielding)
Thermal energy source
Note: Valid only for Cinterion®
modules with dimensions larger
than 50mm and operating
board temperatures higher than
+80°C.
TS-3 Special safeguards required.
Radiated energy source RS-1 The Cinterion
®
module does not contain a radiant
energy source, any lasers, lamps, LEDs, X-Ray
emitting components or acoustic couplers.
Table 32: IEC 62368-1 Classification
Source of Energy Class Limits