Specifications

Cinterion
®
PLSx3 Hardware Interface Description
5.4 Compliance with FCC and ISED Rules and Regulations
111
t
PLSx3_HID_v01.003 2021-03-12
Public / Released
Page 109 of 121
IMPORTANT:
Manufacturers of portable applications incorporating PLSx3 modules are required to have their
final product certified and apply for their own FCC Grant and ISED Certificate related to the
specific portable mobile. This is mandatory to meet the SAR requirements for portable mobiles
(see Section Table 31: for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules and with ISED license-exempt RSS standard(s).
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
FCC Part 15.19 Warning Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
If Canadian approval is requested for devices incorporating PLSx3 modules the below notes
will have to be provided in the English and French language in the final user documentation.
Manufacturers/OEM Integrators must ensure that the final user documentation does not con-
tain any information on how to install or remove the module from the final product.
Maximum gain in LTE Band 26 9.30 6.10 dBi
Maximum gain in LTE Band 66 5.00 5.00 dBi
Maximum gain in LTE Band 71 8.48 5.45 dBi
Table 34: Antenna gain limits for FCC and ISED (for X, X2, X3, X4 variants)
Operation band FCC limit ISED limit
Unit