Specifications

Cinterion
®
PLSx3 Hardware Interface Description
6.1 Revision History
117
t
PLSx3_HID_v01.003 2021-03-12
Public / Released
Page 112 of
Proceeding document New document: "Cinterion
®
PLSx3-W Hardware Interface Description"
Version 00.012
New document:
"Cinterion
®
PLSx3 Hardware Interface Description" Version 00.024
Proceeding document New document: "Cinterion
®
PLSx3-W Hardware Interface Description"
Version 00.002
New document:
"Cinterion
®
PLSx3-W Hardware Interface Description" Version 00.012
2.1.3.1 Add Reducing Power Consumption section.
2.1.9 Added Analog-to-Digital Converter (ADC) section.
2.1.10.3,
2.1.10.4
Added Fast shutdown and Remove Wakeup sections.
3.1 Added Operation Mode section.
3.2.5 Added Automatic shutdown with sub sections.
3.3 Added Power Saving section.
3.6 Added Electrostatic Discharge section.
4.3.1.2 Added Figure 40.
4.3.2.2 Added Figure 44 and Table 25.
5 Added chapter 6 Regulatory and Type Approval Information.
7.2 Added Module Label Information section.
3.2.1 Updated Figure 23 and the description of IGT signal.
2.1.2 Updated Ignition signal description in Table 3.
Chapter What is new
-- Added new variants of -X, -EP, -LA and -J as well as their supported bands.
-- Update the height of the module.
2.1.1 Updated the pad assignment. Update the number of GPIO to 22.
2.1.6 Updated Figure 8.
2 Added the following chapters: 2.1.10.1, 2.2, 2.3, 2.4.
3.2.5 Added Automatic Shutdown section.
3.4.1 Updated power consumption.
3.5 Added Operating Temperatures section.
-- Removed TX-activity.
Chapter What is new
2 Added the following new sections: 2.1.7, 2.1.8.1, 2.1.10, 2.1.6.1
3 Added the following new sections: 3.2.2, 3.2.4, 3.2.2
4 Added the following new sections: 4.2.4, 4.3
2.1.1 Updated the pad assignment
1.3 Updated Figure 1