Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Antenna Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
PLSx3 Hardware Interface Description
3.4 Power Supply
82
t PLSx3_HID_v01.003 2021-03-12
Public / Released
Page 73 of 121
3.4.1 Power Supply Ratings
The tables in this section assemble various voltage supply and current consumption ratings of
the module.
Table 17: Supply Ratings
Description Conditions Min Typ Max Unit
BATT+ Supply voltage Normal Range
(Directly measured at Module. Volt-
age must stay within the min/max
values, including voltage drop, ripple,
spikes.)
The module shall work with supply
voltages between 3.0 and 4.5V as
normal voltage range.
3.0 3.8 4.5 V
Maximum allowed
voltage drop
during transmit
burst
Normal condition, power control level
for Pout max
400 mV
Voltage ripple Normal condition, power control level
for Pout max
@ f <
250 kHz
@ f > 250 kHz
120
90
mV
pp
mV
pp