Product Info
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W(-B/-C)/TX82-W Hardware Interface Description
4.4 Packaging
130
t TX62-W_TX62-W-x_TX82-W_HID_v01.000 2021-05-19
Confidential / Preliminary
Page 122 of 154
4.4 Packaging
4.4.1 Tape and Reel
The single-feed tape carrier for TX62/TX82 is illustrated in Figure 62. The figure also shows the
proper part orientation. The tape width is 24mm and the TX62/TX82 modules are placed on the
tape with a 22mm pitch. The reels are 330mm in diameter with a core diameter of 99.50mm.
Each reel contains 500 modules.
4.4.1.1 Orientation
Figure 62: Carrier tape
A: 2.50mm B: 11.00mm C1: 330mm D: 99.50mm H: 24.50mm
T: 2.30mm
A0: 15.80mm B0: 15.80mm D0: 1.50mm D1: 1.5mm E: 1.75mm
F: 11.50mm K0: 2.80mm P: 20.00mm P0: 4.00mm P2: 2.00mm
T: 0.30mm W: 24.00mm
TBD.