Product Info
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W(-B/-C)/TX82-W Hardware Interface Description
5.3 Reference Equipment for Type Approval
140
t TX62-W_TX62-W-x_TX82-W_HID_v01.000 2021-05-19
Confidential / Preliminary
Page 137 of 154
5.3 Reference Equipment for Type Approval
The Thales reference setup submitted to type approve TX62/TX82 (including a special approv-
al adapter for the DSB75) is shown in the following figure
1
:
Figure 74: Reference equipment for type approval
1. For RF performance tests a mini-SMT/U.FL to SMA adapter with attached 6dB coaxial attenuator is cho-
sen to connect the evaluation module directly to the LTE/GSM/GNSS test equipment instead of employ-
ing the SMA antenna connectors on the TX62/TX82-DSB75 adapter as shown in Figure 74. The
following products are recommended:
Hirose SMA-Jack/U.FL-Plug conversion adapter HRMJ-U.FLP(40)
(for details see http://www.hirose-connectors.com/ or http://www.farnell.com/
Aeroflex Weinschel Fixed Coaxial Attenuator Model 3T/4T
(for details see http://www.aeroflex.com/ams/weinschel/pdfiles/wmod3&4T.pdf)
DSB75
DSB75Adapter
SIMCard
SMA
SMA
SMA
USB
PC
Power
Supply
LTE/GSM
BaseStation
GNSS
Antenna
ASC0
Main
Antenna
Eval_Board
TX62/T X82
Eval_Board
TX62/TX82
ASC1