Product Info
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W(-B/-C)/TX82-W Hardware Interface Description
5.4 Compliance with FCC and ISED Rules and Regulations
140
t TX62-W_TX62-W-x_TX82-W_HID_v01.000 2021-05-19
Confidential / Preliminary
Page 138 of 154
5.4 Compliance with FCC and ISED Rules and Regulations
The Equipment Authorization Certification for the Thales reference application described in
Section 5.3 will be registered under the following identifiers:
FCC Identifier: QIPTX82-W (not granted yet)
ISED Certification Number: 7830A-TX82W (not granted yet)
Granted to THALES DIS AIS Deutschland GmbH
FCC Identifier: QIPTX62-W (not granted yet)
ISED Certification Number: 7830A-TX62W (not granted yet)
Granted to THALES DIS AIS Deutschland GmbH
FCC Identifier: QIPTX62-W-B (not granted yet)
ISED Certification Number: 7830A-TX62WB (not granted yet)
Granted to THALES DIS AIS Deutschland GmbH
FCC Identifier: QIPTX62-W-C (not granted yet)
ISED Certification Number: 7830A-TX62WC (not granted yet)
Granted to THALES DIS AIS Deutschland GmbH
Note
1
: Manufacturers of mobile or fixed devices incorporating TX62/TX82 modules are autho-
rized to use the FCC Grants and ISED Certificates of the TX62/TX82 modules for their own final
products according to the conditions referenced in these documents. In this case, an FCC/ IC
label of the module shall be visible from the outside, or the host device shall bear a second label
stating "Contains FCC ID: QIPTX82-W" or "Contains FCC ID: QIPTX62-W(B|C)", and according-
ly “Contains IC: 7830A-TX82W“ or “Contains IC: 7830A-TX62W(B|C)“. The integration is limited
to fixed or mobile categorized host devices, where a separation distance between the antenna
and any person of min. 20cm can be assured during normal operating conditions.
For mobile and fixed operation configurations the antenna gain, including cable loss, must not
exceed the limits listed in the following Table 37, Table 38, and Table 39 for FCC and/or ISED.
1. Label note in French for ISED: Les fabricants d'équipement mobile ou fixe intégrant le module
ALAS66A-W/-US sont autorisés à utiliser les accords FCC et certificats d'Innovation, Sciences et Déve-
loppement économique Canada (ISED) du module ALAS5-W/-AM pour leur propre produit final suivant
les conditions référencées dans ces documents. Dans ce cas, le label FCC du module doit être visible
de l'extérieur, sinon l'équipement hôte doit disposer d'un second label avec la déclaration suivante
"Contains FCC ID: QIPTX82-W", ou "Contains FCC ID: QIPTX62-W(B|C)" et en conséquence "Contains
IC: 7830A-TX82W", ou "Contains IC: 7830A-TX62W(B|C)". L'intégration est limitée aux catégories
d'équipement hôte mobile ou fixe, respectant une distance minimum de 20 centimètres entre l'antenne
et toute personne avoisinante pour des conditions d'utilisation normale.
Table 37: Antenna gain limits for FCC for TX82-W
Maximum gain in operating band FCC limit ISED limit All limits Unit
LTE Band 2 11.01 11.01 11.01 dBi
LTE Band 4 8.00 8.00 8.00 dBi
LTE Band 5 12.41 9.10 9.10 dBi
LTE Band 12 11.70 8.61 8.61 dBi
LTE Band 13 12.16 8.93 8.93 dBi
LTE Band 25 11.01 11.01 11.01 dBi