Product Info

Table Of Contents
Cinterion
®
TX62-W(-B/-C)/TX82-W Hardware Interface Description
6.2 Related Documents
148
t TX62-W_TX62-W-x_TX82-W_HID_v01.000 2021-05-19
Confidential / Preliminary
Page 144 of 154
New document: "Cinterion
®
TX62-W/TX82-W Hardware Interface Description" v00.038
6.2 Related Documents
[1] TX62/TX82 AT Command Set
[2] TX62/TX82 Release Note
[3] Universal Serial Bus Specification Revision 2.0, April 27, 2000
[4] Application Note 48: SMT Module Integration
[5] Differences between Selected Cinterion
®
Modules, Hardware Migration Guide, v11
[6] Cinterion
®
IoT Module Services User Guide, v01
[7] Cinterion
®
IoT SDK User Guide, v01
Throughout
document
Added support for optional eUICC interface.
1.2 Added references from key feature list to appropriate document sections.
1.2 Added support for Cinterion
®
IoT Module services (MODS) as key feature.
2.1.1 Revised Note 2 of Table 2
2.1.2 Revised Table 3 related to power supply
2.1.2.1 Added absolute maximum ratings for digital lines in normal operation.
2.1.7 New section eUICC Interface.
2.1.11.2 Adapted power indication circuit shown in Figure 21.
2.1.11.3 Revised fast shutdown description.
2.3.1 Added note that concurrent GNSS and GSM/LTE operations are not supported.
2.3.2 Revised description for active GNSS antenna and Figure 31
2.3.3 Revised Table 12 listing GNSS antenna interface characteristics.
2.4 Revised Figure 32
3.2.3 Revised section Signal States after Startup including Table 11.
3.4.1 Revised Table 17 related to power supply
4.2 New section Mechanical Dimensions of TX82-W, TX62-W-B and TX62-W-C
4.3.1.1 Added Land pattern and Stencil for TX82-W
Chapter What is new
-- Initial document setup.
Chapter What is new